User manual SAMSUNG HM-6450

[. . . ] 11 Using the voice command and voice prompts . Please read this manual before operating your headset, and keep it for future reference. Graphics used in this manual is for illustration purposes. No part of this user manual may be reproduced, distributed, translated, or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or storing in any information storage and retrieval system, without the prior written permission of Samsung Electronics. [. . . ] To answer or reject a call after you hear "Call from [phone number]. Say Answer or Ignore" To redial the last number dialed on the phones. To call the corresponding speed dial stored on your phone. To acess the voice dialing feature of the phones, if the phone supports it. Command "Pair active" "Pair normal" "Connection status" "Answer" or "Ignore" "Redial" (primary phone) or "Redial two"(secondary phone) "Call 1", "Call 2" or "Call 3" Your headset recognizes up to three speed dial numbers that are saved in your phone "Phone voice command"(primary phone) or "Phone voice command two"(secondary phone) Action To check the status of voice prompt, and turn it on or off. Status When you enter Pairing mode When you enter Active pairing mode When Active pairing fails When you connect the headset to a phone (when Multi-point mode is off) When you connect the headset to a phone (when Multi-point mode is on) When you connect the headset to a music device When a call comes in Voice prompt "Ready to pair. Search for the headset from the Bluetooth menu. Enter 0000 if prompted for a PIN" "Active pairing mode" "Active pairing failed" "Device is connected" "Primary device is connected" or "Secondary device is connected" "Music device is connected" "Call from [phone number]. Pairing will create a unique and encrypted wireless link between two Bluetooth enabled devices, such as a Bluetooth phone and a Bluetooth headset. In Pairing mode, two devices should be placed close enough. Pairing and connecting the headset with a phone With the headset turned on, press and hold the Talk button for 4 seconds. If you turn on the headset for the first time, it proceeds into Pairing mode immediately. Activate the Bluetooth feature on your phone and search for the headset (see your phone's user manual). Select the headset (HM6450) from the list of devices found by your phone. If request, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect the headset to your phone. Once pairing is completed, the headset will attempt to reconnect each time you turn it on. Your headset supports the Simple Pairing feature which allows the headset to be paired with a Bluetooth device without requesting a PIN. This feature is available for devices that are compliant with Bluetooth version 2. If your phone supports A2DP (Advanced Audio Distribution Profile), you can also listen to music with your headset. You cannot control playback using your headset. With the Active pairing feature, your headset automatically looks for a Bluetooth device within range and tries to make a connection with it. The Bluetooth phone you want to connect with must not be paired with other devices. [. . . ] The headset and the travel adapter may not have been connected properly. Separate the headset from the travel adapter, reconnect, and charge the headset. available features may vary depending on the connected device. If your headset is connected to two devices at once, some features may be unavailable. [. . . ]