User manual SAMSUNG HP-P4271

[. . . ] Owner's Instructions HP-P4271 This device is a Class B digital apparatus. Important Warranty Information Regarding Television Format Viewing Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. [. . . ] 1080i) modes, Panorama mode can't be selected. 1080i) modes, you can move the picture on screen by pressing the or button. (All screen modes) Notes 49 Freezing the Picture Still Press the STILL button on the remote control to freeze a moving picture. Press again to cancel. 50 Viewing the Picture-in-Picture Selecting the PIP Screen 1 Press the MENU button. Press the or button to select "Picture", then press the ENTER button. TV Mode Custom Color Tone Color Control Film Mode Size PIP More Move Picture : Custom : Normal : Off : 16:9 Quick way to access the PIP mode: Just press the "PIP" button on the remote control. For further information on "Sound Select", refer to page 69. Enter Return 2 Press the or button to select "PIP", then press the ENTER button. TV PIP Source Swap Size Position Air/CATV Channel Sound Select Move PIP : Off : TV : : : Air :4 : Main Enter Return 3 Press the ENTER button, then press the or button to select "On". The PIP image will appear in the corner of the screen. · Pressing the or button will alternate between "On" and "Off". TV PIP Source Swap Size Position Air/CATV Channel Sound Select Move PIP : Off Off : TV On : : : Air :4 : Main Enter Return Note · Check if the V-Chip Lock (refer to page 103) is ON if the PIP On/Off will not function. PIP does not function when the V-Chip Lock is set to On. Change the setting to Off and try it again. 4 Press the MENU button to exit. O : PIP and Swap Operate X : PIP doesn't Operate TV O O O O O O O O O O PIP Settings Main screen PIP screen TV AV 1 AV 2 AV 3 S-Video 1 S-Video 2 Component 1 Component 2 PC DVI AV 1 O X O O O O O O O O AV 2 O O X O O O O O O O AV 3 O O O X O O O O O O S-Video 1 S-Video 2 Component 1 Component 2 O O O O X O O O O O O O O O O X O O O O O O O O O O X X X X O O O O O O X X X X PC O O O O O O X X X X DVI O O O O O O X X X X 51 Selecting an External Signal You can use PIP to view a signal from an external source, such as a VCR. 1 Press the MENU button. Press the or button to select "Picture", then press the ENTER button. TV Mode Custom Color Tone Color Control Film Mode Size PIP More Move Picture : Custom : Normal : Off : 16:9 Enter Return 2 Press the or button to select "PIP", then press the ENTER button. TV PIP Source Swap Size Position Air/CATV Channel Sound Select Move PIP : On : TV : : : Air :4 : Main Enter Return 3 4 Press the or button to select "Source", then press the ENTER button. TV PIP Source Swap Size Position Air/CATV Channel Sound Select Move PIP : Off TV : TV AV1 : AV3 : S-Video1 : Air : 22 S-Video2 : Main Enter Return AV2 Press the or button to cycle through all of the available signal sources: "TV", "AV1", "AV2", "AV3", "S-Video1", "S-Video2", "Component1", "Component2", "PC", and "DVI". The signal from these inputs will not appear if you have not connected any equipment to the PDP's respective input jacks. TV PIP Source Swap Size Position Air/CATV Channel Sound Select Move PIP : Off . . . Component1 : TV Component2 5 Press the MENU button to exit. : PC : DVI : Air :4 : Main Enter Return Notes · The PIP function operates in Wide screen (16:9 and Panorama). · Using Multi-Screen in the Normal (4 : 3) or Zoom screen will change the size of the main screen to Wide screen. · The same Source can not be selected on both main screen and subscreen at the same time. · If the main picture is in TV(DTV), COMPONENT, DVI mode, the same mode cannot be displayed in the PIP picture. 52 Swapping the Contents of the PIP and Main Image 1 Press the MENU button. Press the or button to select "Picture", then press the ENTER button. TV Mode Custom Color Tone Color Control Film Mode Size PIP More Move Picture : Custom : Normal : Off : 16:9 Quick way to access swapping: Just press the "SWAP" button under the cover of the remote control. Enter Return 2 Press the or button to select "PIP", then press the ENTER button. TV PIP Source Swap Size Position Air/CATV Channel Sound Select Move PIP : On : TV : : : Air :4 : Main Enter Return 3 Press the or button to select "Swap", then press the ENTER button. · The image in the PIP window will appear on the main screen, and vice versa. TV PIP Source Swap Size Position Air/CATV Channel Sound Select Move PIP : On : TV : : : Air :4 : Main Enter Return 4 Press the MENU button to exit. Note · If main picture is in TV(Analog air signal), TV(DTV), COMPONENT, DVI, HDMI mode, Swap is not available. 53 Changing the Size of the PIP Window 1 Press the MENU button. Press the or button to select "Picture", then press the ENTER button. TV Mode Custom Color Tone Color Control Film Mode Size PIP More Move Picture : Custom : Normal : Off : 16:9 Quick way to access PIP size: Just press the "SIZE" button under the cover of the remote control. Enter Return 2 Press the or button to select "PIP", then press the ENTER button. TV PIP Source Swap Size Position Air/CATV Channel Sound Select Move PIP : On : TV : : : Air :4 : Main Enter Return 3 Press the or button to select "Size", then press the ENTER button. TV PIP Source Swap Size Position Air/CATV Channel Sound Select Move PIP : On : TV : : : Air :4 : Main Enter Return 4 Press the or button to select option you want, then press the ENTER button. TV PIP Source Swap Size Position Air/CATV Channel Sound Select Move PIP : On : TV : : : Air :4 : Main Enter Return 5 Press the MENU button to exit. 54 Changing the Location of the PIP Image 1 Press the MENU button. Press the or button to select "Picture", then press the ENTER button. TV Mode Custom Color Tone Color Control Film Mode Size PIP More Move Picture : Custom : Normal : Off : 16:9 Enter Return 2 Press the or button to select "PIP", then press the ENTER button. TV PIP Source Swap Size Position Air/CATV Channel Sound Select Move PIP : On : TV : : : Air :4 : Main Enter Return 3 Press the or button to select "Position", then press the ENTER button. TV PIP Source Swap Size Position Air/CATV Channel Sound Select Move PIP : On : TV : : : Air :4 : Main Enter Return 4 Press the or button to select the PIP position you want, then press the ENTER button. TV PIP Source Swap Size Position Air/CATV Channel Sound Select Move PIP : On : TV : : : Air :4 : Main Enter Return 5 Press the MENU button to exit. Note · The Double1( ) or Double2( ) mode cannot be selected in the Position menu. 55 Selecting a Signal Source (Antenna or Cable) for PIP If the PIP source is TV while PIP is ON, you can select a different broadcasting source for the PIP picture from the main picture. 1 Press the MENU button. Press the or button to select "Picture", then press the ENTER button. TV Mode Custom Color Tone Color Control Film Mode Size PIP More Move Picture : Custom : Normal : Off : 16:9 Enter Return 2 Press the or button to select "PIP", then press the ENTER button. TV PIP Source Swap Size Position Air/CATV Channel Sound Select Move PIP : On : TV : : : Air :4 : Main Enter Return 3 Press the or button to select "Air/CATV", then press the ENTER button. TV PIP Source Swap Size Position Air/CATV Channel Sound Select Move PIP : On : TV : : Air : Air STD : 4 HRC : MainIRC Enter Return 4 If an antenna is connected, the setting is "Air". [. . . ] A selected symbol " " will be displayed. Press the ENTER button to block or unblock the category. Note: The V-Chip will automatically block any category that is "more restrictive". For example, if you block the "PG-13" category, then "R", "NC-17" and "X" will automatically be blocked also. 106 How to Reset the TV after the V-Chip Blocks a Channel ("Emergency Escape") If the TV is tuned to a restricted channel, the V-Chip will block it. [. . . ]