User manual SAMSUNG HP-T4234

[. . . ] Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of PDP Displays that leave subtle, but permanent burned-in ghost images in the PDP picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On PDP models that offer picture sizing features, use these controls to view different formats as a full screen picture. [. . . ] Press the or button to select Channel List, then press the ENTER button. TV Channel Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength LNA : On Move Enter TV Channel List All Added Favorite Default List Mode Return 3 Press the or button to select All, Added or Favorite, then press the ENTER button. To toggle between your all channels, add channels, or favorite channels, use the P. MODE (RED) button on the remote control. · P. MODE (RED) button: Press repeatedly to select All, Added, or Favorite. · STILL (YELLOW) button: Press to delete all channels memorized. : All Move Air 2 Enter Return Channel List /Added Air 2 Air 3 Air 4 Air 5 Air 6 Air 7 Cable 8 Air 9 Move RETURN Cable 9 Air 10 Air 11 Cable 11 Air 12 Air 13 Air 14 Air 15 List Mode Air 16 Delete All Enter Return FAV. CH Setting the Default Channel List Mode You can set All, Added, or Favorite to be the Default List that appears when you press the CH LIST button. 1 2 3 Press the MENU button to display the menu. Press the or button to select Channel, then press the ENTER button. Press the or button to select Channel List, then press the ENTER button. Press the or button to select Default List Mode, then press the ENTER button. Press the or button to select All, Added, or Favorite, then press the ENTER button. The Channel list you want to appear when you press the CH LIST button. · All: Shows All the channels when you press the CH LIST button on the remote control. · Added: Shows Added channels when you press CH LIST button on the remote control. · Favorite: Shows Favorite channels when you press CH LIST button on the remote control. TV Channel Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength LNA : On Move Enter TV Channel List All Added Favorite Default List Mode Return All : All Added Favorite Enter Return Press the EXIT button to exit. Press the CH LIST button on the remote control to bring up the Channel Lists. Move English - 42 Labeling Channels Channels can labeled so that their call letters appear whenever the channel is selected. If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal. You can also press the ENTER button to select OK then press the EXIT button to exit the menu. OK Enter Return TV TV Channel Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength LNA : On Move Enter Signal Strength Return LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). 1 2 Press the MENU button to display the menu. Press the or button to select Channel, then press the ENTER button. Press the or button to select LNA, then press the ENTER button. TV Channel Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength LNA : On Move Enter TV Channel Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Off Signal Strength On LNA : On Move Enter Return Return 3 Press the or button to select Off or On, then press the ENTER button. If the picture is noisy with the LNA set to On, select Off. The LNA setting must be made separately for each channel. English - 44 PC Display Using Your TV as a Computer (PC) Display Setting Up Your PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer or video card manufacturer. ) 1 First, click on Control Panel on the Windows start menu. [. . . ] For installation, refer to the Installation Manual provided with the wall mount. For product installation and the installation and moving of the wall mount, make sure to consult a specialized installation company. This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building materials, please contact your nearest dealer. [. . . ]