User manual SAMSUNG HPN6339

[. . . ] Owner's Instructions HPN5039/HPN6339 SERVICE DIVISION 400 Valley Road, Suite 201 Mount Arlington, NJ 07856 TEL : 1-800-SAMSUNG (1-800-726-7864) www. samsungusa. com BN68-00476A-00 Warning!Important Safety Instructions Thank You for Choosing Samsung Thank you for choosing Samsung!Your new Samsung product represents the latest in television technology. We designed it with easy-to-use on-screen menus and closed captioning capabilities, making it one of the best products in its class. [. . . ] The TV will change channels when you press the second number. When you use the number buttons, you can directly select channels that were either erased or not memorized. To change to single-digit channels (0~9) faster, press "0" before the single digit. (For channel "4" press "0", then "4". 1 2 3 4 Turn off your VCR. (or Cable box, DVD player) Press the MODE button. Mode is changed whenever MODE button is pressed(New mode is displayed on LED screen). Using the Pre-CH button to select the previous channel Press the PRE-CH button. The TV will switch to the last channel viewed. To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. Then, use the PRE-CH button to quickly alternate between them. Press the SET button on your TV's remote control. Adjusting the Volume Using the Volume Buttons Press the VOL + or VOL ­ buttons to increase or decrease the volume. Using the number buttons on your remote control, enter three digits of the VCR (or Cable box, DVD player) code listed on page 38 of this manual for your brand of VCR (or CATV, DVD). Make sure you enter three digits of the code, even if the first digit is a "0". (If more than one code is listed, try the first one. ) Using Mute Using the MUTE Buttons At any time, you can temporarily cut off the sound using the MUTE button. 5 1 2 36 Press the MUTE button and the sound cuts off. The word "Mute" will appear in the lower-left corner of the screen. Press the Power button on the remote control. Your VCR (or CATV, DVD) should turn on if your remote is set up correctly. If your VCR (or CATV, DVD) does not turn on after setup, repeat steps 2, 3, and 4, but try one of the other codes listed for your brand of VCR (or CATV, DVD). If no other codes are listed, try each code, 000 through 089 (or Cable box: 000 through 077, DVD player: 000 through 008). Notes · When your remote control is in "VCR" mode, the VCR control buttons (Stop, REW, Play/Pause, FF) still operate your VCR. To turn mute off, press the MUTE button again, or simply press the VOL + or VOL ­ button. Mute · When your remote control is in "CATV" or "DVD" mode, the VCR control buttons (Stop, REW, Play/Pause, FF) still operate your VCR. 37 Remote Control Codes VCR Codes P L A S M A D I S P L A Y P A N E L Cable Box Codes Picture Control Customizing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Using Automatic Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Selecting the Color Tone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 DNIe (Digital Natural Image engine) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Viewing the Picture-in-Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Changing the Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Freezing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 DVD Codes 38 Customizing the Picture You can use the on-screen menus to change the Contrast, Brightness, Sharpness, Color, and Tint settings of your PDP. Using Automatic Picture Settings Your PDP has automatic picture settings that allow you to adjust the video display easily. Picture 1 Press the MENU button, then press the ENTER button. Mode Adjust Color Tone DNIe Custom Custom On 1 Press the MENU button, then press the ENTER button. Picture Mode Adjust Color Tone DNIe Custom Custom On Quick way to access the picture setting: Just press the "P. MODE" button under the cover of the remote control. Menu Move Select Move Select Menu 2 Press the UP or DOWN button to select "Adjust", then press the ENTER button. You will also see the items "Contrast", "Brightness", "Sharpness", "Color" and "Tint". Picture Mode Adjust Color Tone DNIe Custom Normal On 2 Press the LEFT or RIGHT button to select "Custom", "Dynamic", "Standard" or "Movie" picture setting. · You can select "High", "Middle", "Low" or "Custom" in PC/DVI mode. Picture Mode Adjust Color Tone DNIe Dynamic Custom On Move Enter Menu Move Select Menu 3 Press the UP or DOWN button to select the item you wish to change. Adjust Contrast Brightness Sharpness Color Tint R 50 80 50 50 50 G 50 3 Press the MENU button to exit. Move Adjust Menu 4 Press the LEFT or RIGHT button to change the value of the item. Contrast 82 5 Press the MENU button to exit. Note · In the PC/DVI mode, you can't adjust the Sharpness, Color and Tint. · The Tint cannnot be adjusted in Component(480p, 720p, 1080i) mode. 40 41 Selecting the Color Tone 1 Press the MENU button, then press the ENTER button. Picture Mode Adjust Color Tone DNIe Custom Custom On DNIe (Digital Natural Image engine) Samsung' s New Technology brings you more detailed images with contrast and white enhancement and 3D noise reduction. 1 Press the MENU button, then press the ENTER button. Picture Mode Adjust Color Tone DNIe Custom Custom On Quick way to select DNIe : Simply press the "DNIe" button under the cover of the remote control. Menu Move Select Move Select Menu 2 Press the UP or DOWN button to select "Color Tone", then press the LEFT or RIGHT button to select "Normal", "Warm1", "Warm2", "Cool2" or "Cool1". · You can select "Custom", "Color1", "Color2" or "Color3" in PC mode. · You can select "Color1", "Color2" or "Color3" in DVI mode. Picture Mode Adjust Color Tone DNIe Custom Normal On 2 Press the UP or DOWN button to select "DNIe", then press the LEFT or RIGHT button to select "On", "Off" or "Demo". Picture Mode Adjust Color Tone DNIe Custom Normal On Move Select Menu 3 . Press the MENU button to exit. · On : Switches on the DNIe mode. · Demo : The screen before applying DNIe appears on the right and the screen after applying DNIe appears on the left. [. . . ] Press the UP or DOWN button to select "U" or "B". Press the RIGHT button to save the settings. Note: The V-Chip will automatically block any category that is "more restrictive. "For example, if you block the "PG-13" category, then "R", "NC-17" and "X" will automatically be blocked also. 93 Selecting the Film Mode 1 Press the MENU button. [. . . ]