User manual SAMSUNG HS060HB

[. . . ] You just have to make a partition and format your drive for using. Please make sure whether you had partitioned and formatted. First of all, you must partition and format for recognizing the new drive in the Windows Explorer. Within Win98 series, please use the Fdisk. [. . . ] If apply impact to the HDD, it causes a Bad Sector by crashing between Head and Media. Do not remove all items, such as Hard drive label, warranty label. Warranty void if any stickers or l abels are removed or damaged. Do not touch the circuit board with hands or tools. Protect the HDD from Electrostatic Discharge (ESD). MR Head is very sensitive in Electrostatic. Keep the HDD in their static shielding bag. The Names and Content of Toxic and Hazardous Substances or Elements Parts Printed Circuit Assemblies Head Disk Assemblies Toxic and hazardous substances or elements Hg Cr 6+ PBB PBDE Pb Cd O O O X O O O O O X O O O : Indicates that the concentration of the hazardous substance in all h omogeneous materials in the parts is below the relevant threshold of the SJ/T11363-2006 standard. X : Indicates that the concentration of the hazardous substance of at least one of all homogeneous materials in the parts is above the relevant threshold of the SJ/T11363-2006 standard. SAMSUNG ELECTRONICS CO. , LTD. STORAGE SYSTEM DIVISION HEAD OFFICE: 94-1, IM SOO-DONG, GUMI-CITY KYUNG BUK, KOREA 730-350 FAX : 82-54-479-5567 Samsung Electronics Co. , Ltd. BF68-00250A REV01 Precautions Avoid extreme temperatures and humidity places. Humidity causes a drive malfunction by reacting with an ingredient of oil in Disk and Head surface. Also, parts can be corrode by leaving in humidity. PATA Installation 1. Making Computer Detect the New Device Run the CMOS (BIOS) set-up program to detect the new hard disk drive. FAQs Q1 PATA Interface Cable 1 2 - Turn off the system power !- Cover opening mechanism and the location of the hard disk drive may vary from one computer to another. Go into CMOS screen during the booting of the computer. For descriptive details of the program, refer to the computer's user's manual. 1 If your computer supports IDE HDD Auto Detection, the hard disk drive will automatically be detected. 2 If your computer does not support auto detect, go into the User Define Mode and by referring written information on the product, set the correct settings for Cylinder, Head, and Sector and if some Bios must be, set the HDD Mode to LBA. 3 Save the changed details and exit. When using within an USB external case, sometimes drive is not recognized. It may be caused by insufficiency of USB DC power. By supplying a subsidy DC power, the symptom can be solved. [. . . ] Mount the hard disk drive in the designated place in the computer with screws provided with the product. Connect 40 pin interface cable and power cable. Make sure that the direction of the cables are correct and matches the shape of the receptacles when connecting cables. Incorrect cable connection may damage the hard disk drive. 2. [. . . ]