User manual SAMSUNG HT-C453

[. . . ] HT-C450 HT-C453 HT-C455 Digital Home Cinema System user manual Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. samsung. com/register Safety Information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CLASS 1 KLASSE 1 LUOKAN 1 KLASS 1 PRODUCTO This symbol indicates important instructions accompanying the product. LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT LÁSER CLASE 1 WARNING ~ To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION ~ Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. ~ The Mains plug is used as a disconnect device and shall stay readily operable at any time. [. . . ] ~ 720p : Outputs 720 lines of progressive video. ~ 1080i : Outputs 1080 lines of interlaced video. ~ 1080p : Outputs 1080 lines of progressive video. NOTE ` ` ` When using HDMI, the screen is automatically converted to the 16:9 Wide mode and TV Aspect is deactivated. If a DVD is in the 4:3 ratio, you cannot view it in the wide screen. Since DVD discs are recorded in various image formats, they will look different depending on the software, the type of TV, and the TV aspect ratio setting. NOTE ` ` If Component or Composite is connected, the resolution supports only 480i(576i). 1080P may not appear depending on TV. HDMI Format You can optimize the colour setting from the HDMI output. ~ TV : Select if connected to a TV via HDMI. ~ Monitor : Select if connected to a Monitor via HDMI. BD Wise (Samsung products only) BD Wise is Samsung's latest inter-connectivity feature. When you connect Samsung products with BD-Wise to each other via HDMI, the optimum resolution will be set automatically. English Setup Audio Speaker Setting Speaker Size You can set the Speaker Size of the Center and Rear Speakers, as well as Test Tone in this mode. Settings Speaker Setting Speaker Size Sound Edit Delay Time Test Tone : OFF Adjusting Front/Rear Speaker Balance ` You can select between 0 and -6. ` The volume decreases as you move closer to ­6. Adjusting Centre/Rear/Subwoofer Speaker Level ` The volume level can be adjusted in steps from +6dB to ­6dB. ` The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB. Delay Time If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the Centre and Rear speakers. You can also set the Test Tone in this mode. Move Select Return Select Return Setting up the Speaker Delay Time When 5. 1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the Center and Rear Speakers. Settings Delay Time Front Center Rear Subwoofer Test Tone : OFF : 00mSEC : 10mSEC ~ For the Front speakers, the mode is set to Small. ~ For the Subwoofer, the mode is set to Present. ~ For the Centre and Rear speakers, you can switch the mode to Small or None. - Small : Select this when using the speakers. - None : Select this when no speaker is connected. NOTE ` The speaker mode may vary depending on the Dolby Pro Logic and Stereo settings. Sound Edit You can adjust the balance and level for each speaker. Settings Sound Edit Front Bal. Center Level Rear Level SW Level dB L dB L R R dB dB dB dB dB Change Move Select Return Select Return NOTE ` ` The Delay Time menu will be activated only when a 5. 1 channel source is played. You can not set Centre and Rear in this mode when their Speaker Size is set to None. Change Move Select Return Select Return Press the $% buttons to select and adjust the desired speaker. Press the _+ buttons to adjust the settings. English 03 Setup Ideal Centre Speaker placement Test Tone Settings Speaker Setting Speaker Size Sound Edit Delay Time Test Tone : On Ideal Rear Speaker placement Move Select Return Select Return Place all speakers within this circle. Df: The distance from Front Speaker Dc: The distance from Centre Speaker Dr: The distance from Rear Speaker Use the Test Tone feature to check the speaker connections. [. . . ] · Audio language and subtitles will not work if the disc does not contain them. · Are you using a disc that does not contain menus? Playback does not start immediately when the Play/Pause button is pressed. Sound is not produced. Sound can be heard only from a few speakers and not all 6. Dolby Digital 5. 1 CH Surround Sound is not produced. The remote control does not work. · Disc is rotating but no picture is produced. [. . . ]