User manual SAMSUNG HT-C463

[. . . ] HT-C463 Digital Home Theater System user manual Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. samsung. com/register Safety Information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates important instructions accompanying the product. WARNING · To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. [. . . ] If you want to change the resolution in BD Wise mode, you must set BD mode to Off in advance. BD Wise will be disabled if the product is connected to a device that does not support BD Wise. Resolution Sets the output resolution of the HDMI video signal. The number in 480p, 720p, 1080i and 1080p indicates the number of lines of video. The i and p indicate interlace and progressive scan, respectively. · BD Wise : Automatically sets the optimal resolution when connected via HDMI to a TV with the BD Wise feature. (The BD Wise menu item appears only if BD Wise is set to On. ) · 480p : Outputs 480 lines of progressive video. · 720p : Outputs 720 lines of progressive video. · 1080i : Outputs 1080 lines of interlaced video. · 1080p : Outputs 1080 lines of progressive video. NOTE When using HDMI, the screen is automatically converted to the 16:9 Wide mode and TV Aspect is deactivated. If a DVD is in the 4:3 ratio, you cannot view it in the wide screen. Since DVD discs are recorded in various image formats, they will look different depending on the software, the type of TV, and the TV aspect ratio setting. NOTE If Component or Composite is connected, the resolution supports only 480i. 1080P may not appear depending on TV. HDMI Format You can optimize the color setting from the HDMI output. · TV : Select if connected to a TV via HDMI. · Monitor : Select if connected to a Monitor via HDMI. BD Wise (Samsung products only) BD Wise is Samsung's latest inter-connectivity feature. When you connect Samsung products with BD-Wise to each other via HDMI, the optimum resolution will be set automatically. English 23 Setup Audio Speaker Setting Speaker Size You can set the Speaker Size of the Center and Rear Speakers, as well as Test Tone in this mode. Settings Speaker Setting Speaker Size Sound Edit Delay Time Test Tone : Off Adjusting Front/Rear Speaker Balance You can select between 0 and -6. The volume decreases as you move closer to ­6. Adjusting Center/Rear/Subwoofer Speaker Level The volume level can be adjusted in steps from +6dB to ­6dB. The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB. Delay Time If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the Center and Rear speakers. You can also set the Test Tone in this mode. Move Select Return Select Return Setting up the Speaker Delay Time When 5. 1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the Center and Rear Speakers. Settings Delay Time Front Center Rear Subwoofer Test Tone : Off : 00mSEC : 10mSEC · For the Front speakers, the mode is set to Small. · For the Subwoofer, the mode is set to Present. · For the Center and Rear speakers, you can switch the mode to Small or None. [. . . ] Using the RESET function will erase all stored settings. · While "NO DISC" message appears on the display of the product, press and hold the remote control's STOP () button for longer than 5 seconds. "INIT" appears on the display and all settings will return to the default values. Using the RESET function will erase all stored settings. [. . . ]