User manual SAMSUNG HT-C5900

[. . . ] HT-C5900 5. 1CH Blu-ray Home Cinema System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. samsung. com/register Safety Information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates "dangerous CAUTION : TO PREVENT ELECTRIC voltage" inside the product that presents SHOCK, MATCH WIDE BLADE OF PLUG a risk of electric shock or personal injury. TO WIDE SLOT, FULLY INSERT. This symbol indicates important instructions accompanying the product. LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT LÁSER CLASE 1 WARNING · To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CLASS 1 KLASSE 1 LUOKAN 1 KLASS 1 PRODUCTO CAUTION · Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. [. . . ] Press the buttons to select Wired or Wireless, and then press the ENTER button. Go to the next section. ' Return 2. After the Network Function has acquired the network values, press the RETURN button. Then, run a Network Test to ensure the product has connected to your network (See page 41). If the Network Function does not acquire the network values or you selected Manual, go to the directions for Manual Setup. Setting Up a Wired Connecton - Manual If the Auto Setting does not work, you'll need to set the Network Setting values manually. To get the Network setting values from most Windows computers, follow these steps: Network Settings Please contact your ISP to find out if your IP address is static or dynamic. If it is dynamic, we recommend using the Auto setting. This is the easiest and will work in the majority of cases. If it is static, you must use the manual set up procedure. Directions for wired networks are below. Directions for wireless networks are after the directions for wired networks. Wired Network 1. In the Network Settings menu, press the buttons to select Network Settings, and then press the ENTER button. The Internet Protocol Setup screen appears. Press the button, then select Auto or Manual, and then press the ENTER button. If you selected Auto, the Network Function acquires and fills in the values for IP Address, Subnet Mask, etc. , automatically. 1. Right click the Network icon on the bottom right of the screen. On the dialog that appears, click the Support tab. On the Support tab, click the Details button. The Network settings are displayed. To enter the Network settings into your product, follow these steps: 1. On the Internet Protocol Setup screen, press the ENTER button. Press the buttons to select Manual, and then press the ENTER button. [. . . ] · Check whether the network connection is successful or not by using Network Test menu. (See page 41) · Check whether the USB memory device is connected with product or not. · The memory device must have at least 1GB of free space to accommodate the BD-LIVE service. You can check the available size in BD Data Management. [. . . ]