User manual SAMSUNG HT-C6530

[. . . ] HT-C6530 5. 1CH Blu-ray Home Theater System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. samsung. com/register Safety Information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates important instructions accompanying the product. WARNING · To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. [. . . ] Press the button to go to the first entry field (IP Address). NOTE This process can take up to five minutes. 38 English 03 Setup Settings Network Settings Display On-Screen Menu Internet Protocol Setup : Manual Disc Menu Audio 0 IP Address :0 Audio System Subnet Mask : 255 255 Network Subtitle 0 Gateway :0 Language DNS : Manual Security 0 DNS Server :0 General Support : : 0 : 255 : 0 \ 0 0 0 0 2. 3. Press the RED(A) button on the remote control. Press the PBC (WPS) button on your router within two minutes. Your product displays the Network Selection Screen, and automatically acquires all the network setting values it needs and connects to your network. When it is done, it displays an OK button. After the network connection is set up, press the RETURN button to exit the Network Setting screen. 0 > Move " Select ' Return Select to configure your network type and IP address, or to perform a Network Test. 4. 5. Use the number buttons on your remote to enter numbers. When done with each field, use the button to move successively to the next field. You can also use the other arrow buttons to move up, down, and back. Enter the IP Address, Subnet Mask, and Gateway values. Press the button to go to the first DNS entry field. Press the RETURN button on your remote. 4. Setting Up the Wireless Network Connection - Auto Network Search Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the setup process. 6. Run a Network Test to ensure the product has connected to your network (See page 41). Wireless Network You can setup the wireless network three ways: · Using PBC (WPS) · Using the Auto Network Search function. Setting Up the Wireless Network Connection - PBC (WPS) The easiest way to set up the wireless network connection is using the PBC (WPS) function. If your wireless router has a PBC (WPS) button, follow these steps: Setting Up the Network Connection To set up the wireless connection using Auto Network Search, follow these steps: 1. In the Network Settings menu, press the buttons to select Network Settings, and then press the ENTER button. The Internet Protocol Setup screen appears. Press the buttons to select the Internet Protocol Setup, and then press the ENTER button. Press the buttons to select Auto or Manual, and then press the ENTER button. If you selected Auto, press the button to go to Access Point Selection, and then press the ENTER button. The Network function searches for available wireless networks. [. . . ] (See page 36) · Please check whether the BD-LIVE Internet Connection menu is set to Allow(All). · If all above fails, contact the contents provider or update the latest firmware. · The memory device must have at least 1GB of free space to accommodate the BD-LIVE service. You can check the available size in BD Data Management. [. . . ]