User manual SAMSUNG HT-D450

[. . . ] HW-D450 HW-D451 Crystal Surround Air Track (Active Speaker System) user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. samsung. com/register features Active Speaker System This unit features an Active Speaker System that provides high sound quality in a single slim unit. This unit does not require any satellite loudspeakers or speaker cabling, which are normally associated with conventional surround sound systems. Multi-function Remote Control The supplied remote control can be used to control the TV connected to this unit. The remote control has a TV hotkey that enables you to perform various operations with the simple press of a button. Special Sound mode You can select from 7 different sound modes (MUSIC, NEWS, DRAMA, CINEMA, SPORTS, GAME, PASS (Original Sound)) depending on the type of content you want to enjoy. Compatibility with various audio Technologies This unit employs decoders compatible with Dolby Digital and DTS (Digital Theater Systems). - DolbyDigital This is the standard audio signal format used on DVDs and other purely digital media. [. . . ] For more information on HT-WDC10, refer to the HT-WDC10's user manual. HOWTOLinKTHeWireLeSSTranSMiTTerWiTHTHeMainUniT Set an ID of the Subwoofer before setting a Transmitter ID. Turn off your Home Theater (HW-D450, HW-D451). Press the hold "3DSOUnD" button on the remote control for 5 seconds. The standby light on the HW-D450, HW-D451 will blink once. Connect the iPod/iPhone to the Wireless transmitter. Press the "iDSeT" button on the back of the Wireless transmitter for 5 seconds. The link light on the wireless transmitter will blink fast. Turn on your Home Theater(make sure the wireless transmitter's Link LED in ON). To listen to music from your iPod/iPhone over the Home Theater, select the iPod mode as the Home Theater's source. · You can control the speaker volume of iPod/iPhone with a volume wheel or a volume bar. · When iPod/iPhone is stopped or in a power saving mode, a Wireless transmitter is turned to the Sleep Mode. When iPod/iPhone is turned to the Deep Sleep Mode, the Wireless transmitter is off. POWER TV POWER TV INFO LIN K VOL CH AR GE STA ND BY MUTE TV CH 3D SOUND POWER TV POWER SOUND MODE INPUT SELECT DRC AUTO POWER S. VOL TV INFO VOL TV CH MUTE DIMMER 3D SOUND SOUND MODE INPUT SELECT DRC AUTO POWER S. VOL DIMMER SPK CONTROL HDMI SPK CONTROL HDMI S/W LEVEL AV SYNC AUDIO AH59-02330A S/W LEVEL AV SYNC AUDIO AH59-02330A Ifyouusethemainunitnearbyawirelessdevicesuchasalaptopcomputer, anAP, orWifi, anyunstableoperationerrorcanhappen. DonotpairingthesubwooferandiPod/iPhoneatthesametime. Ifyoupairingatthesame time, iPod/iPhoneandsubwoofermaynotconnecttotheSoundbar. iPod/iPhoneMODeLSTHaTCanBeUSeDWiTHTHiSPrODUCT (1st, 2nd, 3rd, and4th generation) (1st, 2nd, 3rd, 4th, 5th, and6thgeneration) iPodtouch iPodnano iPodclassic iPhone4 iPhone iPodwithvideo iPhone3gS iPhone3g "Made for iPod, " and "Made for iPhone" mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc. , registered in the U. S. The volume control may not be operated normally except at the referred models. If there is any error happened at the models above, please update the software of iPod/iPhone at the lastest version. 1 COnneCTingTHeCrySTaLSUrrOUnDairTraCK This section explains two ways (digital and analog) of connecting the unit to the TV. This unit is equipped with two optical digital jacks and one audio analog jack for connecting a TV. EnG ONLY FOR UPDATE connEctionS AUDIO IN audioCable DIGITAL AUDIO IN 1, 2 DIGITAL AUDIO IN 2 OPTICAL DIGITAL AUDIO IN 1 White AUDIO OUT L R or Red OPTICAL OUT or OpticalCable BD/DVDplayer/ Set-topbox/ gameconsole AUDiO in Connect AUDIO IN on the main unit to the AUDIO OUT of the TV or Source Device. or, OPTiCAl DigiTAl in 1, 2 Connect the Digital Input on the main unit to the OPTICAL OUT of the TV or Source Device. Do not connect the power cord of this product or your TV to the wall outlet until all Before moving or installing this product, be sure to turn off the power and disconnect the If you select 'ANALOG' without connecting the Audio Cable, the set is turned off automatically If a TV or any device connected to Air Track with the optical cable is off and there is no after 20 minutes. digital input, the Air Track is turned off after 20 minutes. (If there has been no input signal for over 20 minutes from DIGITAL AUDIO IN 1 or 2, the Air Track will be turned off. ) When Air Track isn't linked with HT-WDC10 model in the W. iPod mode, Air Track will turn off after 20 minutes. connections between components are complete. 15 functions bASiC fUnCTiOnS POWER TV POWER POWER TV POWER Turning the power on/off 1. [. . . ] Ar so Samsung deklar, ka Crystal Surround Air Track atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. Siuo Samsung deklaruoja, kad sis Crystal Surround Air Track atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Hierbij verklaart Samsung dat het toestel Crystal Surround Air Track in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Hawnhekk, Samsung, jiddikjara li dan Crystal Surround Air Track jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC. [. . . ]