User manual SAMSUNG HT-D5200

[. . . ] · The Mains plug is used as a disconnect device and shall stay readily operable at any time. · This apparatus shall always be connected to an AC outlet with a protective grounding connection. · To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. CLASS 1 LASER PRODUCT This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION · INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. 2 English 2011-07-12 11:23:54 HT-D5200_XY_0712. indd 2 Precautions · Ensure that the AC power supply in your house complies with the identification sticker located on the back of your product. [. . . ] When you access this function for the first time, the password setup screen appears. Enter a desired 4-digit password using the number buttons. (The default password is 0000. ) After you have set your password, select an age rating you want to set for the BD Parental Rating and a rating level you want to set for the DVD Parental Rating. The product will only play Blu-ray discs rated at or below the age rating and DVD discs rated below the numeric rating unless the password is entered. Larger numbers indicate more mature content. General Front Display Change the brightness display of the front panel. · Bright : Brighten the display window. NOTE The Power button and the Function button are not possible to change the Brightness. Network Remote Control The Network Remote Control function lets you control your Blu-ray Home Cinema from a remote device such as a smart phone through a wireless connection to your local area network. To use the Network Remote Control function, follow these steps: 1. Select On in the Network Remote Control menu. Install the Samsung network remote control application to control your product on your compatible portable device. Make sure your portable device and your product are connected to the same wireless router. Start the application on your portable device. In the product's menu, go to Settings > Support > Software upgrade. Select By Disc. NOTE When the system upgrade is done, check the software details in the software Upgrade menu. Do not turn off the product during the software Upgrade. It may cause the product to malfunction. To use the Via download function, your product must be connected to the Internet. Download in Standby Mode You can set the Download in Standby Mode function so that the product downloads new upgrade software when it is in Standby mode. In Standby mode, the product is off, but its Internet connection is active. This allows the product to download upgrade software automatically, when you are not using it. To set Download in Standby Mode, follow these steps: 1. Press the buttons to select Download in Standby Mode, and then press the ENTER button. · Off : If you select Off, the product will notify you with a pop up message when new upgrade software is available. · On : If you select On, the product will automatically download new upgrade software when it is in Standby mode with the power off. If it downloads new upgrade software, the product will ask you if you want to install it when you turn the product on. NOTE When the system upgrade is done, check the software details in the software Upgrade menu. Do not turn off the product during the Software Upgrade. It may cause the product malfunction. Via download The Via download option lets you upgrade using a file the product downloaded earlier but you decided not to install immediately or a file downloaded by the product in Standby Mode (See Download in Standby Mode below). [. . . ] "Not Available" appears on screen. If the HDMI output is set to a resolution your TV cannot support (for example, 1080p), you may not see a picture on your TV. No HDMI output. · Check the connection between the TV and the HDMI jack of the product. · Check if your TV supports 576p/480p/720p/1080i/1080p HDMI input resolution. · If random noise appears on the screen, it means that TV does not support HDCP (High-bandwidth Digital Content Protection). Abnormal HDMI output screen. 64 English 2011-07-12 11:24:45 HT-D5200_XY_0712. indd 64 06 Other information Symptom PC Share Manager function I can see folders shared through the PC Share Manager, but I cannot see the files. Check/Remedy · Since it shows only files corresponding to the Image, Music, and Movie categories, files that do not correspond to these categories may not be displayed. AllShare function Video is played intermittently. [. . . ]