User manual SAMSUNG HT-D7000

[. . . ] HT-D7000 2. 1CH Blu-rayTM Home Entertainment System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. samsung. com/register HT-D7000_ELS_0306. indd 1 2011-03-08 11:56:18 Safety Information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates "dangerous CAUTION : TO PREVENT ELECTRIC voltage" inside the product that presents SHOCK, MATCH WIDE BLADE OF PLUG a risk of electric shock or personal injury. TO WIDE SLOT, FULLY INSERT. This symbol indicates important instructions accompanying the product. LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT LSER CLASE 1 WARNING To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CLASS 1 KLASSE 1 LUOKAN 1 KLASS 1 PRODUCTO CAUTION Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. [. . . ] If there is a download available, the Download pop-up appears with a progress bar and the download starts. When the download is complete, the Upgrade Query window appears with three choices: Upgrade Now, Upgrade Later, or Don't Upgrade. If you select Upgrade Now, the product upgrades the software, turns off, and then turns on automatically. If you do not make a selection in one minute or select Upgrade Later, the product stores the new upgrade software. You can upgrade the software later using the Via download function. If you select Don't Upgrade, the product cancels the upgrade. NOTE The disc tray must be empty when you upgrade the software using the USB Host jack. When the software upgrade is done, check the software details in the software Upgrade menu. Do not turn off the product during the software upgrade. It may cause the product to malfunction. Software upgrades using the USB Host jack must be performed with a USB memory flash stick only. English HT-D7000_ELS_0306. indd 39 39 11:57:13 2011-03-08 Setup By Disc To upgrade by Disc, follow these steps: 1. Download the latest disc software upgrade zip archive to your computer. You should have a single folder with the same name as the zip file. Finalise the disc before you remove it from your computer. In the product's menu, go to Settings > Support > Software upgrade. Select By Disc. NOTE When the system upgrade is done, check the software details in the software Upgrade menu. Do not turn off the product during the software Upgrade. It may cause the product to malfunction. To use the Via download function, your product must be connected to the Internet. Download in Standby Mode You can set the Download in Standby Mode function so that the product downloads new upgrade software when it is in Standby mode. In Standby mode, the product is off, but its Internet connection is active. This allows the product to download upgrade software automatically, when you are not using it. To set Download in Standby Mode, follow these steps: 1. Press the buttons to select Download in Standby Mode, and then press the ENTER button. Off : If you select Off, the product will notify you with a pop up message when new upgrade software is available. On : If you select On, the product will automatically download new upgrade software when it is in Standby mode with the power off. If it downloads new upgrade software, the product will ask you if you want to install it when you turn the product on. NOTE When the system upgrade is done, check the software details in the software Upgrade menu. Do not turn off the product during the Software Upgrade. It may cause the product malfunction. Via download The Via download option lets you upgrade using a file the product downloaded earlier but you decided not to install immediately or a file downloaded by the product in Standby Mode (See Download in Standby Mode below). To upgrade Via download, follow these steps: 1. [. . . ] You can check the available size in BD Data Management. (See page 37) Please check whether the BD-LIVE Internet Connection menu is set to Allow(All). If all above fails, contact the contents provider or update the latest firmware. The memory device must have at least 1GB of free space to accommodate the BD-LIVE service. [. . . ]