User manual SAMSUNG HT-D7200

[. . . ] HT-D7200 HT-D7200B 2. 1CH Blu-rayTM Home Entertainment System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. samsung. com/register HT-D7200_ELS_0328. indd 1 2011-03-28 10:33:00 Safety Information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates "dangerous CAUTION : TO PREVENT ELECTRIC voltage" inside the product that presents SHOCK, MATCH WIDE BLADE OF PLUG a risk of electric shock or personal injury. TO WIDE SLOT, FULLY INSERT. This symbol indicates important instructions accompanying the product. LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT LÁSER CLASE 1 WARNING · To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CLASS 1 KLASSE 1 LUOKAN 1 KLASS 1 PRODUCTO CAUTION · Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. [. . . ] When you access this function for the first time, the password setup screen appears. Enter a desired 4-digit password using the number buttons. (The default password is 0000. ) After you have set your password, select an age rating you want to set for the BD Parental Rating and a rating level you want to set for the DVD Parental Rating. The product will only play Blu-ray discs rated at or below the age rating and DVD discs rated below the numeric rating unless the password is entered. Larger numbers indicate more mature content. General Front Display Change the brightness display of the front panel. · Bright : Brighten the display window. NOTE The Power button and the Function button are not possible to change the Brightness. Network Remote Control The Network Remote Control function lets you control your Blu-ray Home Cinema from a remote device such as a smart phone through a wireless connection to your local area network. To use the Network Remote Control function, follow these steps: 1. Select On in the Network Remote Control menu. Install the Samsung network remote control application to control your product on your compatible portable device. Make sure your portable device and your product are connected to the same wireless router. Start the application on your portable device. The application should find your product and display it on a list. Select the product. BD Parental Rating This will prohibit playback of Blu-ray disc rated above Parental Rating. DVD Parental Rating Prevent playback of DVD discs with specific numerical ratings unless a password is entered. 42 English 2011-03-28 10:33:55 HT-D7200_ELS_0328. indd 42 03 6. If this is the first time you are using the function, it will ask you to allow or deny remote control of the product. Follow the instructions that came with the application to control the product. NOTE Setup Your product must be connected to the Internet to use the By Internet function. The upgrade is complete when the product turns off, and then turns on again by itself. Never turn the product off or back on Support manually during the update process. Software Upgrade The Software Upgrade menu allows you to upgrade the product's software for performance improvements or additional services. You can upgrade in four ways: · · · · By Internet By USB By Disc Via download (File) Samsung Electronics shall take no legal responsibility for product malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade. If you want to cancel the upgrade while the upgrade software is downloading, press the ENTER button. By USB To upgrade by USB, follow these steps: 1. Download the latest USB software upgrade zip archive to your computer. You should have a single folder with the same name as the zip file. Make sure the disc slot is empty, and then insert the USB flash drive into the USB port of the product. In the product's menu, go to Settings > Support > Software Upgrade. Select By USB. The four methods are explained below. By Internet To upgrade by Internet, follow these steps: 1. Select By Internet, and then press the ENTER button. [. . . ] · Check whether the network connection is successful or not by using Network Test menu. · Check whether the USB memory device is connected with product or not. · The memory device must have at least 1GB of free space to accommodate the BD-LIVE service. You can check the available size in BD Data Management. [. . . ]