User manual SAMSUNG HT-WS1R

[. . . ] HT-SB1G HT-SB1R HT-WS1G HT-WS1R Crystal Surround Air Track (Active Speaker System) user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. samsung. com/register features Active Speaker System This unit features an Active Speaker System that provides high sound quality in a single slim unit. This unit does not require any satellite loudspeakers or speaker cabling, which are normally associated with conventional surround sound systems. Multi-function Remote Control The supplied remote control can be used to control the TV connected to this unit. The remote control has a TV hotkey that enables you to perform various operations with the simple press of a button. You can adjust the volume, change the channel or customize the navigation menu of the TV using this Multi-function Remote Control. Special Sound Field mode You can select from three different sound field modes (NEWS, CINEMA and MUSIC) depending on the type of the source you want to enjoy. Compatibility with the Technologies This unit employs decoders compatible with Dolby Digital, DTS (Digital Theater Systems) and SFE (Sound Field Effect). [. . . ] Connect to the analog output of an external device. Connect to the digital (optical) output of an external device. When disconnecting the power cable from the wall outlet, hold the plug. Do not pull the cable. Do not connect this unit or other components to the main power until all connections between components are complete. remote control TOUROFTHEREMOTEcOnTROl POWER bUTTON Turns the Crystal Surround Air Track on and off. Place the wall mount bracket on a wall surface and then secure it with two screws (not supplied). . Then, fit the unit into the corresponding slots of the wall mount bracket. For secure installation, make sure the mounting studs slide firmly down into the bottom of the slots. . This is the completion of the suggested wall mount installation. MAX INPUT MODE PCM DOLBY DTS MIN NEWS CINEMA MUSIC Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may result in an injury When the unit is installed on a wall, please make sure that a child does not pull any of connecting cables, as it ma y cause it to fall. or damage to the product. 1 cOnnEcTinGTHEWiRElESSSUBWOOFER (HT-WS1G/HT-WS1R ONLY) The Subwoofer's linking ID is preset at the factory and the main unit and sub should link (connect wirelessly) automatically when turned on. If the link indicator does not light when main unit and subwoofer are turned on, please set the ID by following the process below. Plug the power codes of the main unit and subwoofer into the AC power supply. Press the ID SET button on the back of the subwoofer with a small pointed object for 3 seconds. · The STANDBY indicator is turned off and the LINK indicator (blue LED) blinks quickly. EnG cOnnEcTiOnS POWER TV POWER MENU TOOLS . While main unit is powered off (STANDBY mode), press MUTE on the remote control for 5 seconds. · The volume Level Indicator on the main unit lights up, then returns to STANDBY mode. Press the POWER button to turn on the main unit. · The main unit and the subwoofer are now linked (connected). · The Link indicator (blue LED) on the subwoofer is turned on. · You can enjoy better sound from the wireless subwoofer by selecting the sound field mode. ( See page 16 ) INFO POWER TV POWER EXIT TV SOURCE TV CH MUTE MENU TOOLS VOL INFO VOL EXIT TV SOURCE TV CH MUTE AUTO POWER LINK O/A INPUT PASS NEWS O/A INPUT AUTO POWER LINK PASS NEWS CINEMA MUSIC CINEMA MUSIC Before moving or installing the product, be sure to turn off the power and disconnect the power cord. If the main unit is powered off, the wireless subwoofer will be in the standby mode and the STANDBY LED on the upper side will blink. If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment, or any other device that uses the same frequency (2. 4GHz) near the system, some sound interruption may be heard due to interference. The transmission distance of the wireless signal between the main unit and sub is about 32 feet, but may vary depending on your operating environment. If a steel-concrete or metallic wall is between main unit and the wireless subwoofer, the system may not operate at all, because the wireless signal cannot penetrate metal. If the main unit doesn't make wireless connection, follow steps 1-4 above to retry the connection between the main unit and wireless subwoofer. The wireless receiving antenna is built into the wireless subwoofer. [. . . ] (SAMSUNG) and delivered new, in the originalcarton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: One(1)yearPartsandlabor* (*90DaysPartsandlaborforcommercialUse) This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. [. . . ]