User manual SAMSUNG HT-X620T DOC(DECLARATION OF CONFORMITY)

[. . . ] [. . . ] Check Product's FIRMWARE Version - Turn on the product. Make the tray open by pressing ONEN/CLOSE button. - Press MENU button on the remote controller, then press Numeric button 8, 9, 5. - In some case of 5-Disc supported models, Play an DVD disc first , before Tray open - Do the same procedure mentioned before : press Menu, 8, 9, 5 buttons on the remote controller ( Model name : HT-DB6XX, HT-DS6XX, HT-P4X ) 2 - Product's FIRMWARE Version and File name is displayed in screen. 1 2 : It shows Firmware version of product Above screen, The Version is 1. 12. : It shows Firmware File name of product. Recording speed : under 8x - You can update new F/W, by playing the update disc - For the USB HOST playback supported model, Copy F/W file to USB device . Format the USB Device . Copy the firmware file to USB Memory device - You can update new F/W, by select USB function after USB device plug-in Important notice - Check the F/W file name of the set and file name of new firmware you want to update is same - If the file name is different between New F/W file and filename on the set, Firmware UPDATE can not be done. 4 - Turn on the product, Play an Update disc or a USB Device - Firmware update is carried, repeating ERASE and WRITE after READING - After Update complete, The set goes to turn off and turn on state automatically. - Press (STOP) button on the main unit in "No disc" condition. 5 - Pressing the button continuously until INITIAL display in the Display window - In power off condition, Press (STOP) button on the main unit again. - Pressing the button until the Standby LED on the main unit blink. - After initial, you can select an OSD language in the SETUP Menu 6 [. . . ] [. . . ]