User manual SAMSUNG HW-C700B

[. . . ] HW-C700 HW-C700B HW-C770S HW-C770BS AV Receiver System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. samsung. com/register HW-C700-C770S-C770BS-ELS_0128. in1 1 2010-01-28 11:32:17 Safety information SAFETY WARNINGS TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. [. . . ] The higher the setting, the less sound comes from the centre speaker. ) M PANORAMA, DIMENSION and CENTER WIDTH settings are enabled only if the mode is set to MUSIC. You cannot use Dolby Pro Logic llx mode for multi channel signals such as Dolby Digital, Dolly Digital +, Dolby true HD, DTS, DTS-HD Master Audio. Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz. When Dolby Pro Logic IIz is set ON, Dolby Pro Logic IIx can not be used. 38 HW-C700-C770S-C770BS-ELS_0128. in38 38 2010-01-28 11:33:41 ENG SETTING DOLBY PRO LOGIC IIz Dolby Pro Logic IIz adds front height channels to surround sound. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. Press the ENTER button to select SETUP ENTER. Press the buttons to select DPLIIZ SETUP, and then press the ENTER or button. Each time you press this button, HEIGHT OFF selected in turn. HEIGHT ON will be SETUP M If Dolby Pro Logic IIz is set to On, the Surround Back speaker in the speaker size mode is changed to NONE, the Front Height Speaker will be turned on. If Dolby Pro Logic IIz is set to OFF, the surround back speaker and front height speaker can't be turned to default setting. If you change Dolby Pro Logic IIz mode to Dolby Pro Logic IIx mode, first Dolby Pro Logic IIz will be turned off, second FRONTH in the speaker size mode will be turned off, lastly the Surround Back Speaker will be turned on. If you turn Dolby Pro Logic IIz on, FRONTH in the speaker size mode and the Surround Back Speaker can not be changed to NONE. SETTING TONE CONTROL This will enable you to adjust the bass and treble level. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. Press the ENTER button to select SETUP ENTER. Press the buttons to select TONE CONTROL, and then press the ENTER or button. Press the buttons to select the option you want, and then press the ENTER or button. Each time you press this button, TONE BASS TREBLE will be selected in turn. Press the buttons to set the Tone Control mode you want. If it is set to TONE OFF, the Tone Control function will be disabled. You can adjust it from -6 to +6dB by 1 step. The sound gets quieter at -6dB and louder at +6dB. - To exit setup mode Press the SETUP/MENU button. SETUP OFF appears on the display and Setup Mode is exited. M The Tone Control function can be applied to all channels except for the subwoofer. 39 HW-C700-C770S-C770BS-ELS_0128. in39 39 2010-01-28 11:33:41 Setup SETTING NEO:6 MODE You can play back 2 channel sound over 6. 1 channels when enjoying music or a movie. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. [. . . ] Is SBACK (Surround Back) set to NONE in the Speaker Size?Remedy Refer to pages 14 ~16 to connect them properly. Refer to page 34 to select LARGE or SMALL. Refer to page 41 to set Surround Mode to EX/ES. [. . . ]