User manual SAMSUNG HW-K450

[. . . ] HW-K450 Wireless Subwoofer (PS-WK450) User manual Wireless Audio - Soundbar Thank you for purchasing this Samsung product. To receive more complete service, please register your product at Imagine the possibilities www. Indd 1 2016/4/11 9:03:54 GETTING STARTED FEATURES Samsung Remote App Hold the control of your Soundbar in the palm of your hand with an Android smart device and the Samsung Audio Remote app. This convenient app lets you control all the Soundbar's basic functions such as power, volume, and the media controls, and lets you control customizable functions such as the equalizer. [. . . ] r SURROUND SPEAKERS OUT SPEAKER IMPED ID SET 1. Plug the power cords of the main unit, subwoofer and the SWA-8000S into an AC wall outlet. Press the ID SET button on the back of the subwoofer and the SWA-8000S with a small, pointed object for 5 seconds. €¢ The LINK indicators (Blue LEDs) of the subwoofer and the SWA-8000S blink quickly. The ID SET message appears on the display of the main unit for a short period of time, and then disappears. While the subwoofer's and the SWA-8000S's indicators are flashing blue, press the on the right side of the main unit to turn on the main unit. Button on your remote control for 5 seconds while the main unit is turned OFF. The connection is complete if the blue LEDs on the subwoofer and the SWA-8000S stop blinking and glow continuously. Indd 18 2016/4/11 9:04:17 CONNECTIONS • The main unit, the subwoofer and the SWA-8000S should now be linked (connected). €¢ The LINK indicators (Blue LEDs) on the subwoofer and the SWA-8000S should be glowing continuously and not blinking. €¢ If the LINK indicators are not solid blue, the linking process has failed. Turn off the main unit, go back to Step 2, and start again. €¢ You can enjoy better sound from the wireless subwoofer by selecting a Sound Effect. (See page 9) ENG CONNECTING THE SURROUND SPEAKERS (SOLD SEPARATELY) L R SURROUND SPEAKERS OUT SPEAKER IMPED ID SET Surround Speaker (L) Wireless Receiver Module Surround Speaker (R) ●● Place these speakers to the side of your listening position. If there isn't enough room, place these speakers so they face each other. Position them about 60-90 cm above your ear, facing slightly downward. —â— Surround speakers must be connected to the wireless receiver module. ●● Each speaker has a colored label on its back or underside. Each cable has a single colored band near its end. Match the band on each cable to the speaker label by color, and then connect the cable to the speaker. Indd 19 2016/4/11 9:04:17 CONNECTING TO A TV ●● Important: Before you begin, put the battery into the remote. Press the (Source) button on the right side of the Soundbar or the SOURCE button on the remote control to select the D. [. . . ] A function does not work when the button is pressed. €¢ Is there static electricity in the air?(Mute) button to cancel the Mute ¼¼Disconnect the power plug and connect it again. â¼Â¼Adjust the volume. [. . . ]