User manual SAMSUNG HZ50W

[. . . ] Instructions Use this camera in the following order. Setting up the application software To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. (p. 22) Getting to Know your camera Thank you for buying a Samsung Digital Camera. [. . . ] In the middle of the sound recording, pressing the shutter button will stop the voice memo. Stop 061 Shooting ( Voice Recording ) Pausing while recording a voice Using this function, you can record your favorite voice clips into a voice recording file without having to create multiple voice recording files. Record Stop Move Record A voice can be recorded for as long as the available recording time (maximum 5 hours at once) allows. Back [Voice recording mode] Press the shutter button to record a voice. - Press the shutter button once and voice is recorded for as long as the available recording time (maximum 5 hours at once) allows. The recording time will be displayed on the LCD monitor. Voice will still be recorded if the shutter button is released. - If you wish to stop recording, press the shutter button again. Press the OK button again to resume the recording. If you wish to stop recording, press the shutter button again. A distance of 40cm between you and the camera (microphone) is Record Exit If the camera power is turned off while the voice recording is paused, the voice recording is cancelled. the best distance to record sound. [Voice recording mode] 062 Shooting ( ) Setting user mode You can use your own shooting mode by saving the shooting options which are set in the [Program], [Aperture. Set a desired option and save the setting information. Select a mode from [Program], [Aperture. Select [User Mode Set] in the [Shooting] menu. Select [User Mode 1] or [User Mode 2] by pressing the LEFT/RIGHT buttons and press the OK button to save the setting information. Setting movie recording You can set the desired voice recording mode in Movie mode. Voice User Mode Set Back Move Back Move - [Voice] sub menus [Off] : Record a video without sound. ( ) icon will appear on the LCD monitor. [Zoom Mute] : Record a video without sound while zooming. 063 Shooting ( ) Smart Scene Detection You can set the smart scene detection during movie recording. Smart Scene Detection Distortion Control Distortion compensation Distortion of the center of an image due to a wide-angle lens can be compensated for. If you use the distortion compensation function, the size of the photo will be smaller than one taken with normal shooting. [Off]: Distortion is not compensated for. [On]: Distortion is compensated for. Back Move Back Move [Off]( [On]( ) : Disable scene detection function. ) : Enable scene detection function. Movie clip frame stabiliser This function helps stabilize images captured during movie recording. You can select this menu only in the Movie clip mode. Stabilizer Select [Off] for normal movie recording. When you set [Smart Scene Detection], you cannot set the [Photo Style Selector] and [Smart Filter] options. Back Move [Off]: Movie clip frame stabilizer function is disabled. [On]: Minimises camera shake during movie recording. The recording frame range becomes narrow when you select this menu. 064 Sound menu In this mode, you can set up sound settings. You can use the setup menu in all camera modes, except Voice Recording mode. The items indicated by * are default settings. [. . . ] Refer to the security program instructions about how to temporarily disable the program. The camera is connected to the USB port located on the front of the computer. When the camera is connected to the USB port located on the front of the computer, the computer may not recognize the camera. Connect the camera to the USB port located on the back of the computer. Case 2 Case 7 Case 3 Case 4 Case 8 Case 5 116 FAQ When the DirectX 9. 0c or later is not installed Install the DirectX 9. 0c or later 1) Insert the CD provided with the camera 2) Run the windows explorer and select the [CD-ROM drive:\ DirectX] folder and click the DXSETUP. exe file. [. . . ]