User manual SAMSUNG IAQT12WHWE/AMC

[. . . ] Indoor unit AQ09W8WE AQT12WHWB AQT12WHWE Outdoor unit UQ09W8WE UQT12WHWB UQT12WHWE Split - type Air Conditioner (Cooling and Heating) Acondicionador de aire de tipo partido (Enfriamiento y Calefacción) Climatiseur de type Split (Réfrigération & Chauffage) E S F A DB98-20703A(1) FRANÇAIS ESPAÑOL ENGLISH USER'S MANUAL MANUAL DE USUARIO MANUEL DE L'UTILISATEUR Safety Precautions You should take the following safety precautions when using your air conditioner. · If you don't follow the safety precautions, you may get the risk of an electric shock, injury or death. ·The manufacturer or qualified service personnel must install this air conditioner. · Unplug the electric power before repairing, installing or cleaning. WARNING DURING OPERATION x Do not repair the air conditioner at your discretion. It is recommended to contact a service center directly. [. . . ] Result: x Each time you press the button: - The temperature is adjusted by 1°C - The indoor unit beeps x The air conditioner starts dehumidifying and the fan speed is adjusted automatically. 4 To control the airflow direction, refer to pages 16 and 17. E-12 Selecting the Fan Mode ENGLISH You can select the Fan mode if you want to ventilate your room. It helps to refresh the air in your room. You can adjust the fan speed in this mode. 1 If necessary, press the Result: button. x The operation indicator on the indoor unit lights up. x The air conditioner starts up in the mode you selected last. x The indoor unit beeps. 2 Press the Result: button on the remote control until is displayed. button. x The indoor unit beeps each time you press the x The air conditioner runs in the Fan mode. The outer airflow blade moves up and down to increase the efficiency of the cooling or heating operation. 1 Press the Result: button until the required direction is set. The outer blade is adjusted vertically. 2 Press the button to move the blade up and down automatically during operation. 3 Press the Note button again to stop the blade moving up and down. set to the default position. E-16 Adjusting the Airflow Direction Horizontally ENGLISH You can adjust the airflow direction horizontally with your hands. The inner blades with small fins moves the air to the required direction. 1 Adjust the inner blades by moving them to left or right. E-17 Setting the On Timer You can set the On Timer to turn on the air conditioner automatically at the appointed time. You can set the time from 1 hour to 24 hours. 1 Press the button until the required time is displayed to set the On Timer. You can set the time between 1 hour and 24 hours. 2 Press the Result: button to complete the setting. x The selected mode and the temperature on the display disappear after 10 seconds. x The air conditioner turns on automatically at the appointed time and the On Timer setting disappears. 3 Press the button until the desired mode is displayed at the top of the remote control to select the mode in advance. Result: The air conditioner operates in the selected mode when it is turned on. Note If you don't use the remote control after setting the On Timer, it turns off automatically after 25 hours. To Cancel the On Timer Press the Note button to cancel the On Timer. button, both the On Timer and the Off Timer E-18 Setting the Off Timer ENGLISH You can set the Off Timer to turn off the air conditioner automatically at the appointed time. You can set the time from 1 hour to 24 hours. 1 Press the button until the required time is displayed to set the Off Timer. [. . . ] If necessary, press the button on the remote control. x Check if the Timer indicator on the indoor unit is on. If so: - Wait until the set time is reached and the air conditioner starts automatically. (See pages 18 and 19 for further details) x Check if there are no obstacles in front of the indoor unit. [. . . ]