User manual SAMSUNG IAS09S2GB/XAP

[. . . ] TM TM Indoor unit AS07S2GE SC07AS2 SC07AS2A SC07ZS2 SC07ZS2A AS09S2GB AS09S2GE SC09AS2 SC09ZS2 SC09ZS2A AS12S4GB AS12S4GE SC12AS4 SC12ZS4 SC12ZS4A AS14S4GB AS18S0GBA AS18S0GEA SC18AS0 SC18ZS0A AS24S6GBA AS24S6GEA SC24AS6 SC24ZS6A Outdoor unit US07S2GE SC07AS2X SC07AS2AX SC07ZS2X SC07ZS2AX US09S2GB US09S2GE SC09AS2X SC09ZS2X SC09ZS2AX US12S4GB US12S4GE SC12AS4X SC12ZS4X SC12ZS4AX US14S4GB US18S0GBA US18S0GEA SC18AS0X SC18ZS0AX US24S6GBA US24S6GEA SC24AS6X SC24ZS6AX Split-type Room Air Conditioner (Cool) Aire acondicionado domstico sistema Split (Refrigeracin) Climatiseur de type Spar (Refroidissement) Condizionatore d'aria per ambienti ad unit Separate (Raffreddamento) Aparelho de ar condicionado tipo Split (Refrigerao) Geteilte raumklimaanlage (Khlen) IAIPOYMENO KIMATITMTIKO MATIOY(~) E S F I P D G DB98-16151A(2) EHNIKA DEUTSCH PORTUGUS ITALIANO FRANAIS ESPAOL OWNER'S INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUEL D'UTILISATION ISTRUZIONI PER L'USO MANUAL DE INSTRUES GEBRAUCHSANWEISUNG ENGLISH Safety Precautions The following safety precautions must be taken when using your air conditioner. Disconnect all remote electric power supplies before servicing, installing or cleaning. This must be done by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard. Users of this product are cautioned not to attempt repair of this product at their own discretion. [. . . ] You wish to cool it down as quickly as possible. The Turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected. 1 If necessary, press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. 2 Press the Result: button. The temperature and fan settings are adjusted automatically. The air conditioner cools the room as quickly as possible. After 30 minutes, the air conditioner is reset automatically to the previous mode, temperature and fan settings. But, if you press the button in DRY or FAN mode, it will change to AUTO mode automatically. 3 If you wish to stop the Turbo function before the end of the 30-minute period, press the button one or more times until or disappears. 1 If necessary, press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes. IMPORTANT 2 Select COOL mode by pressing the Note button. You can select the Energy saving mode only in the COOL mode. 3 Press the Result: button. The air conditioner runs in the Energy saving mode. The outer air flow blade moves up and down. To stop the Energy saving mode, press the again. 4 To adjust the temperature, press the button one or more times until the required temperature is displayed. Possible temperatures are between 26C and 30C inclusive. Note If you want to adjust temperature under 26C, cancel the Energy saving mode before adjusting the temperature. 5 To select the fan speed, press the the required setting is displayed. button one or more times until 6 To control the direction of the air flow, refer to page 15. E-14 Adjusting the Air Flow Direction Vertically ENGLISH Depending on the position of the indoor unit on the wall of your room, you can adjust the position of the outer air flow blade on the bottom of the unit, thus increasing the efficiency of the air conditioner. 1 Press the Result: button one or more times as required. Upwards. RECOMMENDATION 2 If you want the blade to move up and down automatically when the air conditioner is operating, press the button. Result: The blade move up and down, around the base position set. 3 To stop the blade moving up and down, press the button again. Note If you switch the air conditioner. . . Set to the initial position powered. Adjusting the Air Flow Direction Horizontally There are two sets of inner air flow blades. Just as the outer air flow blade can be adjusted vertically, the inner blades can be adjusted horizontally. 1 Adjust each set of inner blades to the required position, by pushing or pulling them sideways. E-15 Setting the On Timer The On Timer enables you to switch on the air conditioner automatically after a given period of time. [. . . ] 18C to 43C approx. If the cooling operation is used at over 33C(indoor temperature), it does not cool at its full capacity. E-19 Operating Your Air Conditioner Without the Remote Control Your air conditioner can be operated directly from the indoor unit if the remote control is lost or broken. 1 07/09/12/14 Slide the lower front grille down. 18/24 Open the upper front grille by pulling right and left sides of the grille. 2 To switch the air conditioner on, press the On/Off switch on the right side of the indoor unit. Result: The Operation indicator on the indoor unit comes on. [. . . ]