User manual SAMSUNG KENOX Q2

[. . . ] User's Manual Thank you for buying a Samsung Camera. This manual will guide you through using the camera, including capturing images, downloading images and using the application software. Please read this manual carefully before using your new camera. ENGLISH Instructions Use this camera in the following order Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in the Application S/W CD-ROM. (p. 104) Set up the camera driver Take a picture (p. 19) Take a picture Insert the USB cable Insert the supplied USB cable into the PC's USB port and the camera's USB connection terminal. (p. 112) Check the camera's power Check the camera's power. [. . . ] Select a desired sub menu by pressing the Up/Down button. Press the OK button and the slide show will start. ( ( ) : The slide show is closed after one cycle. ) : The slide show is repeated until the OK button is pressed. Select [SHOW] menu by pressing the Left/ Right button. Select a desired sub menu by pressing the Up/ Down button. Press the OK button and the slide show will start. ( ( ) : The slide show is closed after one cycle. ) : The slide show is repeated until the OK button is pressed. Setting play interval: Set the slide show play interval. Select [INTERVAL] menu by pressing the Left/ Right button. Select a desired sub menu by pressing the Up/ Down button. Configure slide show effects : Unique screen effects can be used for the slide show. Select [EFFECT] menu by pressing the Left/ Right button. Select a desired sub menu by pressing the Up/ Down button. ) : The image slides diagonally from top left to bottom right. ) : Image is displayed slowly from the centre outwards. ) : NO, E1, E2 and E3 effects are applied in order. 68 Setting up the play back function using the LCD monitor PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the PLAY button. Menu tab Main menu Sub menu RIGHT90 LEFT90 Secondary menu - Page ROTATE 180 HORIZONTAL VERTICAL 2272X1704 2048X1536 p. 72 UNLOCK/LOCK UNLOCK/LOCK ONE PIC/ALL PICS NO/ YES DEFAULT/3X5/4X6/5X7/8X10 STANDARD/INDEX/PRINT SIZE p. 73 RESIZE 1600X1200 1024X768 640X480 USER IMAGE 1, 2 PROTECT SELECT ALL DELETE ALL NO YES STANDARD p. 75 DPOF INDEX PRINT SIZE CANCEL COPY TO CARD NO YES 69 Setting up the play back function using the LCD monitor This menu is available while the camera is connected to a PictBridge supporting printer (direct connection to the camera, sold separately) with a USB cable. [. . . ] For Windows 98 PC, remove the camera driver also, restart the PC, and then reinstall the camera driver. Double-click on the entry with the question (?) or exclamation (!) mark, click the "Driver" tab, and click [Update Driver] or [Reinstall Driver]. If a message appears asking you to specify the location of the appropriate device driver, specify "USB Driver" in the CD supplied. [Case 10] In some security programs (Norton Anti Virus, V3, etc. ), the computer may not recognise the camera as a removable disk. Stop the security programs and connect the camera to the computer. [. . . ]