User manual SAMSUNG KENOX UCA3

[. . . ] This manual will guide you through using the Digimax U-CA 3, including taking images, downloading images and using the MGI PhotoSuite III SE software. Please read this manual before using your new camera. ENGLISH Instructions Use this camera in the following order Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in the Application S/W CD-ROM. (p. 95) Set up the camera driver Take a picture (p. 21) Take a picture Insert the USB cable Insert the supplied USB cable into the PC's USB port and the camera's USB connection terminal. (p. 83) Check the camera's power Check the camera's power If the power is turned off, press the camera button to power it on. (p. 24) Check [Removable Disk] Open Window s EXPLORER and search for [Removable Disk]. (p. 84) To play back a video shot with this camera, be sure to use the QuickTime player supplied on the software CD-ROM. Applications that do not support the MPEG-4 codec (e. g. , Windows Media Player) may not be able to play back the video. [. . . ] Movie clips and voice files cannot be printed. You can set up the following settings from the PictBridge menu. IMAGES PRINTER SETUP PRINT DPOF AUTO PRINT RESET : Setting up the scope of PictBridge : Setting up printing : Printing pictures : Printing the DPOF files : Initializing the PictBridge functions Connecting the Camera to a Printer 1. Press the POWER button to turn on the camera. In a mode other than Voice Recording mode, press the MENU button. Press the LEFT/ RIGHT button and select [SETUP] menu tab. Select [USB] menu by pressing the UP/ DOWN button and press the RIGHT button. Select [PRINTER] menu by pressing the UP/ DOWN button and press the OK button. Press the menu button twice and the menu will disappear. Use the supplied USB cable to connect the camera to the printer as shown below. SETUP VIDEO Q. VIEW USB BACK: COMPUTER PRINTER SET:OK 8. Turn on the printer to connect the camera to the printer. If you selected [Computer] in Step 5, when you connect the camera to your printer, the camera status lamp (red) will blink and the connection will not be established. In this case, disconnect the USB cable, and then follow the procedure from Step 2 and onward. 58 PictBridge: Picture Selection You can select the scope of the PictBridge function. The USB menu must be set to [PRINTER] before you connect the camera to the printer. (See p. 58) PICTBRIDGE 2. Use the UP and DOWN buttons to select [IMAGES], and PRINT then press the RIGHT button. Use the UP and DOWN buttons to select the desired submenu value, and then press the OK button. When [ONE PIC] is selected : The PictBridge function will be applied only to the picture currently displayed. When [ALL PICS] is selected : The PictBridge function will be applied to all pictures, excluding movie clips and voice files. Setting the Number of Copies to Print - Select [ONE PIC] or [ALL PICS]. A screen where you can set the number of copies to print will appear as shown below. 01 PRINTS 01 PRINTS EXIT:SH1 MOVE PIC: SET:OK EXIT:SH1 SET:OK [ When [ONE PIC] is selected ] [ When [ALL PICS] is selected ] - Use the UP and DOWN buttons to select the number of copies to print and then press the OK button. The number of copies you wish to make: 30 Unless you press the OK button, the changed number of prints will not be applied. - When selecting [ONE PIC] in Step 4, you can use the LEFT and RIGHT buttons to move to the previous or next picture. - Press the SHUTTER button to return to the PictBridge menu. 59 PictBridge: Print Setting You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. [. . . ] Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera. [Case 5] There is an unexpected error during file transfer Turn the camera power off and on again. Transfer the file again. [Case 6] How do I know my computer supports a USB Interface?Check the USB port in your computer or keyboard. A USB Interface is available in Windows 98, 98SE, 2000, ME . XP. [. . . ]