User manual SAMSUNG L201 BLUE

[. . . ] Instructions Use this camera in the following order. Setting up the application software To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. (p. 18) Getting to Know your camera Thank you for buying a Samsung Digital Camera. [. . . ] - Sub menus [Off] : The DATE & TIME will not be imprinted on the image file. [Date] : Only the DATE will be imprinted on the image file. [Date&Time] : The DATE & TIME will be imprinted on the image file. Auto power off This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. : The power off function SETTINGS Format will not operate. Reset Off [1, 3, 5, 10 min] : The power will turn File 1 min 3 min off automatically if not ImprintOff Power 5 min 10 min used for the period of Video Out OK Set Back time specified. - After replacing the battery, the power off setting will be preserved. - Note that the automatic power off function will not operate if the camera is in the PC / Printer mode, slide show, playing back a voice recording and playing back a movie clip. - Sub menus [Off] SETTINGS Format Reset File Imprint Power Off Video Out Back Off Date Date&Time OK Set The Date & Time are imprinted at the bottom right side of the still image. The imprint function is applied only to still images. Depending on the manufacturer and print mode, the date printed on an image may not be printed correctly. 51 Settings ( " ) Selecting Video out type The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc. ) to which the camera is connected. Connecting to an external monitor When the camera is connected to an external monitor, the image and menus on the LCD monitor will be visible on the external monitor and the LCD monitor of the camera. - NTSC : U. S. A, Canada, Japan, South Korea, Taiwan, Mexico. - PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U. K. , Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand, Norway. - When using a TV as an external monitor, you will need to select the external or AV channel of the TV. - There will be a digital noise on the external monitor, but it is not a malfunction. - If the image is not in the centre of the screen, use the TV controls to centre it. - When the camera is connected to an external monitor, some parts of the image may not be displayed. - When the camera is connected to an external monitor, the menu will be visible on the external monitor and the menu functions are the same as those indicated on the LCD monitor. SETTINGS Format Reset File Imprint Power Off Video Out Back NTSC PAL OK Set Auto Focus lamp Yellow - Video White - sound You can turn on and off the Auto Focus lamp. - Sub menus [Off] : The AF lamp will not light up in low light conditions. [On] : The AF lamp will light up in low light conditions. SETTINGS Reset File Imprint Power Off Video Out AF Lamp Back Off On OK Set 52 Starting play mode Turn the camera on and select Play mode by pressing the play mode button ( ). The camera can now play back the images stored in the memory. [. . . ] In some security programs (Norton Anti Virus, V3, etc. ), the computer may not recognise the camera as a removable disk. Stop the security programs and connect the camera to the computer. Refer to the security program instructions about how to temporarily disable the program. The camera is connected to the USB port located on the front of the computer. [. . . ]