User manual SAMSUNG L250

[. . . ] To avoid injuries or damage to property, please read the following precautions carefully and use the product accordingly. Failure to follow the instructions marked with this symbol may cause personal injury or even fatality. Failure to follow the instructions marked with this symbol may cause personal injury or damage to the product or property. | Power Related | Installation Related | Cleaning and Use Related | [The images here are for reference only, and are not applicable in all cases (or countries). ] Insert the power plug firmly so that it does not come loose. When the connection is not firm, it may cause a fire. Do not use loose power outlets or damaged power cables. [. . . ] - The [PC OUT] function also operates in standby mode. Connecting an AV device using a D-Sub cable First, check that the AV device and your projector are turned off. Connect the [PC IN (1 or 2) PC] terminal at the back of the projector to the D-Sub terminal of your AV device using a D-Sub cable. - For supported input signals, refer to the "AV Timing (D-Sub)". Connect the [PC IN (1 or 2) AUDIO] terminal at the back of the projector to the Audio out terminal of your AV device using an audio cable (Not supplied). Connecting an AV device with component output First, check that the AV device and your projector are turned off. Connect the [PC IN (1 or 2) PC] terminal at the back of the projector to the Component terminal of your AV device using a DSub/Component cable (Not supplied). - For supported input signals, refer to the "AV Timing(D-Sub)". Connect the [PC IN (1 or 2) AUDIO] terminal at the back of the projector and the Audio out terminal of your AV device using an audio cable (Not supplied). Connecting using a Video/S-Video cable First, check that the AV device and your projector are turned off. Connect the [VIDEO] or [S-VIDEO] terminal and the AV device using a Video cable (Not supplied) or S-Video cable (Not supplied). - For supported input signals, refer to the "AV Timing(VIDEO/S-VIDEO)". Connect the [AV IN R-AUDIO-L] terminal at the back of the projector and the Audio out terminal of your AV device using an audio cable (Not supplied). Connecting an External Speaker You can hear sound through an external speaker instead of the internal speaker embedded in the projector. Prepare an audio cable (Not supplied) suitable for your external speaker. Connect the [AUDIO OUT] terminal of the projector to the external speaker using an audio cable. - When using an external speaker, the internal speaker does not operate, but you can adjust the volume of the external speaker using the Volume button of the projector (or remote control). - The [AUDIO OUT] terminal can output all audio signals. | Basic Functions | Input | Picture | Setup | Option | Turning on the projector Check that the lens cover is opened completely. Check that the STAND BY LED indicator is turned on. While the power is turned on (with the Power button on the remote control or at the top of the projector), the blue LAMP LED indicator blinks. When the power is turned on completely, the LAMP LED indicator remains blue. If the projector is turned on when the lamp is not sufficiently cooled, a temporary loud noise may be heard because the fan speed increases to cool the lamp. Turning off the projector Press the Power button. (With the remote control or on top of the projector) OK or Cancel is displayed. Select OK using the arrow keys (With the remote control or on top of the projector). Press the Enter button or press the Power button again. The STAND BY LED indicator is turned off and the LAMP LED indicator blinks. [. . . ] The lamp is located on the left side of the projector (when looking from the front). Do not leave the old lamp near inflammables or in reach of children. Remove dirts or foreign materials around or inside the lamp unit using a proper vacuum device. When handling the lamp, avoid touching any part of it except for the handles. [. . . ]