User manual SAMSUNG L313

[. . . ] Instructions Use this camera in the following order. Set up the Software To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. (p. 20) Getting to know your camera Thank you for buying a Samsung Digital Camera. Prior to using this camera, please read the user manual thoroughly. [. . . ] Press the Play mode button again to turn off the camera. Manner mode: To select the Manner mode, press the Play mode button for more than 3 seconds. In the Manner mode, Operating sound, Effect sound, Start-up sound and Shutter sound will not be generated. To cancel the Manner mode, turn on the camera by pressing the POWER button. You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image. While an image is displayed on full screen, press the Thumbnail button. The thumbnail display will highlight the image that had been showing at the time the thumbnail mode was selected. Press the 5 function button to move to a desired image. To view an image separately, press the Enlargement button. 100-0010 Pressing the Thumbnail ( button 100-0010 ) Pressing the Enlargement ( button <Normal display mode> ) Highlighted image <Thumbnail display mode> 055 Using the camera buttons to set the camera Image enlargement 1. Select an image that you want to enlarge and press the Enlargement button. The maximum enlargement rate in proportion to the image size Image size Maximum enlargement rate 13. 2 11. 7 11. 0 10. 2 8. 1 6. 4 3. 2 2. Different parts of the image can be viewed by pressing the 5 function button. Pressing the Thumbnail button will zoom back to the original full sized image. Trim ­ You can tell whether the image displayed is an enlarged view by checking the image enlargement indicator shown at the top left of the LCD monitor. (If the image is not an enlarged view, the indicator will not be displayed. ) You can also check the area of enlargement. ­ Movie clips and WAV files can't be enlarged. ­ If an image is enlarged, a loss of quality may occur. Trimming: You can extract part of the image that you want and save it separately. 1. Select an image that you want to enlarge and press the enlargement button. Select a desired sub menu by pressing the Up/Down button and press the OK Confirm button. ­ [No]: The trimming menu will disappear. ­ [Yes]: The trimmed image will be saved as a new file name, and appear on the LCD monitor. If there is not enough memory space to save the trimmed image, the image can't be trimmed. 056 Info ( ) / Up button Play & Pause ( ) / Down button )/ Down button works as When the menu is displayed on the LCD monitor, the Up button operates as a direction button. When the menu is not displayed on the LCD monitor, pressing the Info( ) button will display image information on the LCD monitor. 100-0010 100-0010 In Play mode, the Play & Pause ( follows: Info ( ) button ­ If the menu is displayed Press the Down button to move from the main menu to a sub menu, or to move down the sub menu cursor. ­ If a still image with a voice memo, a voice file, or a movie clip is playing · In Stop mode: Plays a still image with a voice memo, a voice file, or a movie clip. [. . . ] Connect the camera to the USB port located on the back of the computer. 103 FAQ When the movie clip doesn't play back on the PC When the movie clip recorded by the camera doesn't play back on the PC, the causes are mostly due to the codec installed on the PC. [Installing codec for Mac OS] 1) Visit the following site for downloading the codec. com/divx/mac) 2) Click the [Free Download] menu on the top right side of the window then download windows appears. 3) Check the version of Mac OS and click the [Download] button to download the file and save it on a desired folder. 4) Run the downloaded file and the codec for playing back the movie clip will be installed. [. . . ]