User manual SAMSUNG LA40B650T1F

[. . . ] To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. · Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty. [. . . ] Press the eXIt or toolS button to exit. tools anynet+ (hDmI-CeC) Picture mode Sound mode Sleep timer SrS tS Xt energy Saving Dual l-ll move : Standard : Custom : off off : off : mono adjust exit truSurround Xt, SRS and Symbol are trademarks of SRS Labs, Inc. truSurround Xt technology is incorporated under license from SRS Labs, Inc. auto Volume: off/on Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. english - 1 tV Speaker: off/on If you want to hear the sound through separate speakers, cancel the internal amplifier. The - Vol + and mute buttons do not operate when the "TV Speaker" is set to Off. When "TV Speaker" is set to "Off", you can operate only "Sound Select" (in PIP mode) in Sound menu. Sound Select: main/Sub When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture. - main: Used to listen to the sound of the main picture. - Sub: Used to listen to the sound of the sub picture. Selecting the Sound mode You can set the sound mode in the "tools" menu. When you set to "Dual I-II", the current sound mode is displayed on the screen. Press the toolS button on the remote control. Press the or button repeatedly until the desired time appears (Off, 30, 60, 90, 120, 150, 180). The TV automatically switches to standby mode when the timer reaches 0. tV mode : Custom Setup equalizer Plug & Xt SrS tSPlay : off language : english auto Volume : off time Internal mute auto Wall-mount : off reset melody : off entertainment : off energy Saving : off PIP move enter return move enter return tV Clock Set Sleep timer timer 1 timer timer time : 1:00 am : off : 0 0 : 90 : 10 10 10 move enter return easy Setting 1. Press the toolS button on the remote control. Press the or button to select "Sleep Timer". Press the or button to select the minute. Press the eXIt or toolS button to exit. tools anynet+ (hDmI-CeC) Picture mode Sound mode Sleep timer SrS tS Xt energy Saving Dual l-ll move : Standard : Custom off : off : off : mono adjust exit english - Switching the Television On and Off Automatically 1. Press the or button to select "Setup", then press the ENTER button. Press the or button to select "Time", then press the ENTER button. Press the or button to select "Timer 1", "Timer 2", "Timer 3", then press the ENTER button. Three different On/Off Timer Settings can be made. Press the or button to select the required item below. [. . . ] the locking device has to be purchased separately. Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction (Figure 2). Fix the Kensington lock to a desk or a heavy stationary object. The place of the Kensington Lock may be different depending on its model. Cable Figure 2 Figure 1 <optional> english - troubleshooting: before Contacting Service Personnel No sound or picture Check that the mains lead has been connected to a wall socket. [. . . ]