User manual SAMSUNG LE23R82B

[. . . ] LCD TV LE23R8 LE26R8 Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country REPUBLIC OF IRELAND U. K Customer Care Centre 0818 717 100 0870 SAMSUNG (7267864) Web Site www. samsung. com/uk www. samsung. com/uk Owner's Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. ON-SCREEN MENUS PC DISPLAY PICTURE IN PICTURE (PIP) TELETEXT BN68-01166M-02 Register your product at www. samsung. com/global/register Record your Model and Serial number here for future reference. _______________ Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. WARNINGS: Image retention, commonly known as screen burn-in, can occur on most types of television if the same image is displayed continuously. The most common causes of image retention are logos that remain stationary on the TV screen. [. . . ] DNIeTM (Digital Natural Image engine) This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIeTM technology will fit every signal into your eyes. This function is not available in PC mode. This function is not available in Movie mode. English - 0 Viewing the Picture In Picture (PIP) You can display a sub picture within the main picture of set programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture. Press the MENu button to display the menu. Press the or button to select "Setup", then press the ENTER button. Press the or button to select "PIP", then press the ENTER button. Press the or button to select "On", then press ENTER button. If the PIP is activated, the size of the main picture turns to "16:9". Press the or button to select "Source", then press ENTER button. Select a source of the sub picture by pressing the or button and press the ENTER button. The sub picture can serve different source selections based on what the main picture is set to. TV TV Mode : Custom Setup Equalizer More SRS TSxT : Off home Theater PC : Off Auto Volume : Off light Effect : Watching Mode On Internal Mute : Off Energy Saving : Off Reset hDMI Black level : low PIP Move Move Enter Enter Return Return . 3. Mode Equalizer PIP SRS TSxT Source Auto Volume Size Internal Mute Position Reset Programme : Custom PIP On :: Off TV :: Off : :: Off :P . Move Move Enter Enter Return Return . Press the or button to select "Size" of the sub picture and then press the ENTER button. Select a size of the sub picture by pressing the or button Press the PIP button on the and then press the ENTER button. remote control repeatedly to activate If main picture is in "Component" and "PC" mode, "Size" is not or deactivate the "PIP". Press the or button to select "Position", then press the ENTER button. Select the position of the sub picture by pressing the or button and then press the ENTER button. Press the or button to select "Programme" and then press the ENTER button. You can select the channel that you want to view through sub picture by pressing the or button. The "Programme" can be active when the sub picture is set to TV. [. . . ] Failure to do so may cause serious damage to your set. Wiring the Mains Power Supply Plug (uK Only) IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug. [. . . ]