User manual SAMSUNG LE32A330J1

[. . . ] Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Thank you for purchasing this Samsung product. To receive more complete service, please register your product at Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. (See back cover for more information) Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. [. . . ] Use the number buttons to directly select the channel that you want to fine tune. Fine tuned channels that have been saved are marked with an asterisk "*" on the right-hand side of the channel number in the channel banner. Size: Auto Wide/1:9/Wide Zoom/Zoom/:/Just Scan You can select the picture size which best corresponds to your viewing requirements. Wide Zoom: Magnify the size of the picture more than 4:3. Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size. :: This is the default setting for a video movie or normal broadcasting. Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i) or Component (1080i) signals are input. In PC Mode, only "16:9" and "4:3" mode can be adjusted. Settings can be adjusted and stored for each external device you have connected to an input of the TV. Temporary image retention may occur when viewing a static image on the set for more than two hours. When Double ( , ) mode has been set in PIP, the Picture Size cannot be set. Wide Zoom: Move the screen up/down using the or button after selecting the by pressing the or ENtER button. zoom: Select by pressing the or button. TOOLS Use the or button to move the picture up and down. After selecting , use the or button to magnify or reduce the picture size in the vertical direction. after selecting "Just Scan" in hDMI (100i) or Component (100i) mode: Select by pressing the or button. Use the , , or button to move the picture. O You can select these options by simply pressing the P. Screen Mode: 1:9/ Wide Zoom/Zoom/: When setting the picture size to "Auto Wide" in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it. 1:9: Sets the picture to 16:9 wide mode Wide Zoom: Magnify the size of the picture more than 4:3. Zoom: Magnify the size of the picture vertically on screen. [. . . ] This symptom is caused by external devices, not TV. the 'Resets all settings to This appears when you press and hold the EXIt button for a while. The prodthe default values' message uct settings are reset to the factory defaults. However, there may be few bright or dark pixels on the screen. [. . . ]