User manual SAMSUNG LE32B653

[. . . ] To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty. [. . . ] (This is only available for devices that support the recording function. ) Stops recording. If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*device_name). Anynet+ (device_name) INFO Recording: (*recorder) Stop Recording: (*recorder) Receiver TV Remote Control Buttons Available in Anynet+ Mode Device Type Operating Status Available Buttons Numeric buttons After switching to the device, /// when the menu of the ENTERE buttons corresponding device is displayed Colour buttons on the screen. EXIT button After switching to the device, while playing a file After switching to the device, when you are watching a TV programme When Receiver is activated (Backward search) (Forward search) (Stop) / (Play) (Pause) P > / P < button Y / MUTE button Anynet+ Device Device with built-in Tuner Audio Device The Anynet+ function only works when the active source on the TV remote control is set to TV. The button works only while in the recordable state. You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote control. The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device. The Anynet+ functions do not operate with other manufacturers' products. The , operations may differ depending on the device. English Anynet+ Recording You can make a recording of a TV programme using a Samsung recorder. 1 2 3 Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC). Connect only one receiver (home theatre). Check if the Anynet+ device power cord is properly connected. Check the Anynet+ device's Video/Audio/HDMI 1. 3 cable connections. Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. Check whether the TV remote control is in TV mode. Check whether it is Anynet+ exclusive remote control. Anynet+ doesn't work in certain situations. (Searching channels, Operating Media Play, Plug & Play, etc. ) When connecting or removing the HDMI 1. 3 cable, please make sure to search devices again or turn your TV off and on again. Check if the Anynet+ Function of Anynet+ device is set on. Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. Press the TV button on the TV remote control to switch to TV. [. . . ] , Hg, Cd Pb , 2006/66. [] ( . ) , , , . , Hg, Cd Pb , , 2006/66 . [] Správná likvidace baterií v tomto výrobku (Platí v Evropské unii a dalsích evropských zemích s vlastními systémy zptného odbru baterií. ) Tato znacka na baterii, návodu nebo obalu znamená, ze baterie v tomto výrobku nesmí být na konci své zivotnosti likvidovány spolecn s jiným domovním odpadem. [. . . ]