User manual SAMSUNG LE32S72B

[. . . ] This image retention is also known as "screen burn". Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty. [. . . ] You can select the sound mode to best suit the programming you're watching. When you are satisfie with your setting, press the ENTER button. Mode: Standard/Music/Movie/Speech/Custom You can select the type of special sound effect to be used when watching a given broadcast. Equalizer: Mode/Balance/00Hz/00Hz/kHz/kHz/0kHz/Reset The sound settings can be adjusted to suit your personal preferences. The adjusted values are stored according to the selected "Sound" mode. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. While viewing a Digital channel, this function can be selected. You can only select the language among the actual languages being broadcast. Audio Format: MPEG/Dolby Digital When sound is emitted from both the main speaker and the audio receiver, a around echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function. While viewing a Digital channel, this function can be selected. Press the or button to select "Setup", then press the ENTER Press the or button to select "Time", then press the ENTER button. Set the ate an time you want by pressing the or button, then press the ENTER button. The current time will appear every time you press the INFO button. You can set the month, day, year, hour and minute directly by pressing the number buttons on the remote control. Option : Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. Press the or button to select "Setup", then press the ENTER Press the or button to select "Time", then press the ENTER You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode. Language : English Press the or button to select "Setup", then press the ENTER button. Press the or button to select "Setup", then press the ENTER Press the or button to select "Time", then press the ENTER button. Three different On/Off Timer Settings can be made. (To activate timer with the setting you've chosen, set to "Activate". (To activate timer with the setting you've chosen, set to "Activate". [. . . ] Remove the screws from the center back of the TV, put the screws into the clamps, and then fasten the screws onto the TV again. Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications. Connect the clamps fixe onto the TV an the clamps fixe onto the wall with a strong string and then tie the string tightly. [. . . ]