User manual SAMSUNG LE37A466

[. . . ] Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Thank you for purchasing this Samsung product. To receive more complete service, please register your product at Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. (See back cover for more information) Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen · Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. [. . . ] Audio Format: MPEG/Dolby Digital When sound is emitted from both the main speaker and the audio receiver, a around echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function. While viewing a Digital channel, this function can be selected. You can only select the language among the actual languages being broadcast. This function handles the Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. While viewing a Digital channel, this function can be selected. Auto Volume: Off/On Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. TV Speaker: Off/On If you want to hear the soun through separate speakers, cancel the internal amplifier. The +, ­ and MUTE buttons do not operate when the "TV Speaker" is set to "Off". When "TV Speaker" is set to "Off", the Sound menus cannot be adjusted. Sound Reset: Reset All/Reset Sound Mode/Cancel You can restore the Sound settings to the factory defaults. You can set the sound mode in the "Tools" menu. When you set to "Dual I II", the current sound mode is displayed on the screen. If the stereo signal is weak and an automatic switching occurs, then switch to the Mono. This function is only activated in stereo sound signal. it is deactivated in mono sound signal. This function is only available in Analogue TV mode. You can connect a set of headphones to your set if you wish to watch a TV program without disturbing other people in the room. TV Side Panel When you insert the headphone's plug into the headphone jack, you can not operate "Mode", "Equalizer", "SRS TruSurround XT" and "TV Speaker" in Sound menu. Prolonged use of headphones at a high volume may damage your hearing. You will not hear sound from the speakers when you connect headphones to the TV. [. . . ] Install the TV near to the wall so that it does not fall backwards. It is safe to connect the string so that the clamps fixe on the wall are equal to or lower than the clamps fixe on the TV. If you have any doubt about the security of your connections, contact a professional installer. No sound or picture · Check that the mains lead has been connected to a wall socket. [. . . ]