User manual SAMSUNG LE40S81B

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. Com/global/register Record your Model and Serial number here for future reference. Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". [. . . ] You can select the most comfortable colour tone to your eyes. Move Enter return When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected. To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3. Move Enter return You can set detailed picture settings. TV Picture rmore detailed Settings Size : auto Wide Screen mode : : 9 digital nr : off active Colour : off dnle : off reset : ok Detailed Settings Black adjust : off dynamic Contrast : off gamma Color Space : auto White Balance my Colour Control Edge Enhancement : off You can select the picture size which best corresponds to your viewing requirements. Just Scan :Displays the input scenes as they are without any cutoff when HDMI 720p, 1080i signals are input. TV auto Wide :9 Wide Zoom Zoom :3 Just Scan tV Picture rmore detailed Settings Size : auto Wide Screen mode : : 9 digital nr : off active Colour : off dnle : off reset : ok Press the STILL button to freeze a moving picture into a still one. When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it. You can return to the factory defaults picture settings. If the broadcast signal received by your tV is weak, you can activate the digital noise reduction feature to help reduce any static and ghosting that may appear on the screen. TV Picture rmore detailed Settings Size : auto Wide Screen mode : : 9 digital nr : off active Colour : off dnle : off reset : ok If you set DNIe to on, you can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes. using this function , youcanviewthedifferenceinthevisualquality. DNIeTM (Digital Natural Image engine) This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrastenhancementandwhiteenhancement. You can display a sub picture within the main picture of set programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture. TV tV mode : Custom Setup Equalizer rmore SrS tSxt : off home theater PC : off auto Volume : off Energy Saving : off internal mute : off hdmi Black level : normal reset PiP : Custom PiP on :: off tV :: off : :: off :P You can directly select the black level on the screen to adjust the screen depth. You can select the type of the special sound effect to be used when watching a given broadcast. The sound settings can be adjusted to suit your personal preferences. Sound : Custom : off : off : off : main Balance 00hz 300hz khz 3khz 0khz move adjust return TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. Sound : Custom : off : off : off : main Sound : Custom : off off : off on : off : main You can connect a set of headphones to your set if you wish to watch a tV programme without disturbing the other people in the room. [. . . ] When the control panel window appears, click on "Display" and a display dialog-boxwillappear. Both screen position and size will vary depending on the type of PC monitor and its resolution. the resolutions in the table are recommended. (all resolutions between the supported limits are supported) d-Sub input Coarse and Fine tuning of the image (image lock): the purpose of picture quality adjustment is to remove or reduce picture noise. [. . . ]