User manual SAMSUNG LE46A796R2M

[. . . ] Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Thank you for purchasing this Samsung product. To receive more complete service, please register your product at Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. ) Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen · Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. [. . . ] This mode accelerates the playing speed when using an external game console connected to the TV. If you set any of the three "Entertainment" modes to On, the settings will be locked and can not be adjusted. If you want to make Picture and Sound mode adjustments, the "Entertainment" mode must be turned off. If you set any of the three "Entertainment" modes to On, "SRS TS XT" and "Equalizer" function is not available. The "Entertainment" settings are saved for each input source. Energy Saving: Off/Low/Medium/High/Auto This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the "Energy Saving" mode option to "High" to reduce eye fatigue as well as power consumption. Off: Turns off the energy saving function. To keep your product up-to-date with new Digital Television features then software upgrades are periodically broadcast as part of the normal Television signal. it will automatically detect these signals and display the software upgrade banner. You are given the option to install the upgrade. Press the or button to select "Setup", then press the ENTER Press the or button to select "Software Upgrade", then press the ENTER button. Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will turn off and turn on automatically after completing the firmware upgrade. Please check the firmware version after the upgrades are complete. When software is upgraded, video and audio settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade. bY Channel : Upgrades the software using the broadcasting signal. Standby Mode Upgrade : To continue software upgrade with master power on, Select On by pressing the or button. 45 minutes after entering standby mode , a manual upgrade is automatically conducted. Since the power of the unit is turned on internally, the screen may be on slightly for the LCD product. This phenomenon may continue for more than 1 hour until the software upgrade is completed. [. . . ] Install the TV near to the wall so that it does not fall backwards. It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV. If you have any doubt about the security of your connections, contact a professional installer. No sound or picture · Check that the mains lead has been connected to a wall socket. [. . . ]