User manual SAMSUNG LE55B651T3W

[. . . ] To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty. [. . . ] The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. 1 English Anynet+ To connect to a TV TV Anynet+ Device 1 Anynet+ Device 2 Anynet+ Device 3 Anynet+ Device 4 HDMI 1. 3 Cable HDMI 1. 3 Cable HDMI 1. 3 Cable HDMI 1. 3 Cable Connect the HDMI IN (1, 2, 3 (DVI) or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable. To connect to Home Theatre TV Home Theatre Anynet+ Device 1 HDMI 1. 3 Cable Optical Cable HDMI 1. 3 Cable Anynet+ Device 2 Anynet+ Device 3 Anynet+ Device 4 HDMI 1. 3 Cable HDMI 1. 3 Cable HDMI 1. 3 Cable 1 2 Connect the HDMI IN (1, 2, 3 (DVI) or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable. Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the Home Theatre. When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the Home Theatre's Front Left and Right speakers and the subwoofer. If you want to hear 5. 1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD player or Cable / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or Home Theatre, not the TV. You can connect an Anynet+ device using the HDMI 1. 3 cable. Some HDMI cables may not support Anynet+ functions. Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status. Anynet+ supports up to 12 AV devices in total. Shows the play menu of the connected device. If a DVD recorder is connected, the play menu of the DVD recorder will appear. Starts recording immediately using the recorder. (This is only available for devices that support the recording function. ) Stops recording. If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*device_name). Anynet+ (device_name) INFO Recording: (*recorder) Stop Recording: (*recorder) Receiver TV Remote Control Buttons Available in Anynet+ Mode Device Type Operating Status Available Buttons Numeric buttons After switching to the device, /// when the menu of the ENTERE buttons corresponding device is displayed Colour buttons on the screen. EXIT button After switching to the device, while playing a file After switching to the device, when you are watching a TV programme When Receiver is activated (Backward search) (Forward search) (Stop) / (Play) (Pause) P > / P < button Y / MUTE button Anynet+ Device Device with built-in Tuner Audio Device The Anynet+ function only works when the active source on the TV remote control is set to TV. The button works only while in the recordable state. You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote control. The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device. [. . . ] , Hg, Cd Pb , 2006/66. [] ( . ) , , , . , Hg, Cd Pb , , 2006/66 . [] Sprvn likvidace bateri v tomto vrobku (Plat v Evropsk unii a dalsch evropskch zemch s vlastnmi systmy zptnho odbru bateri. ) Tato znacka na baterii, nvodu nebo obalu znamen, ze baterie v tomto vrobku nesm bt na konci sv zivotnosti likvidovny spolecn s jinm domovnm odpadem. [. . . ]