User manual SAMSUNG LN-R1550

[. . . ] LN-R1550 LN-R2050 1-800-SAMSUNG(1-800-726-7864) U. S. A Samsung Electronics America Service Division 400 Valley Road, Suite 201 Mount Arlington, NJ 07856 www. samsung. com Canada Samsung Electronics Canada Inc. Samsung Customer Care 7037 Financial Drive Mississauga, Ontario L5N 6R3 www. samsung. ca This device is a Class B digital apparatus. Register your product at www. samsung. com/global/register BN68-00816A-00 Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. · Digital Ready TV: When you select the regular screen (4:3) mode to watch an SD-grade digital broadcast (and the set-top box output is 480p). Although digital broadcasting must be in the wide screen (16:9) HD format, broadcasters sometimes show programs made originally in the regular screen format (4:3) by converting the signals into digital form, in which case the left and right side edges of the screen are cropped. Note : If the borders at the left, right and the center of the screen remain fixed for an extended period of time, the amount of light transmission will also remain varied and as a result the borders may leave traces. · Digital Ready TV: When you select the wide screen (16:9) mode to watch an SD-grade digital broadcast (and the set-top box output is 1080i). Do not leave the screen in pause mode for extended periods of time as you may experience the same problem with products by other manufacturers. · Digital Ready TV: When the TV receives HD-grade signals (and the set-top box output is 1080i). When you watch a digital HD-grade broadcast on a regular (4:3) TV with the screen size "16:9" or "Panorama" selected, you will be able to watch the program but the top and bottom edges of the screen will be cropped. Note : If the borders at the top, bottom and the center of the screen remain fixed for an extended period of time, the amount of light transmission will also remain varied and as a result the borders may leave traces. [. . . ] Press the UP/DOWN buttons repeatedly to select the appropriate hour. After the hour is entered, press the LEFT/RIGHT buttons to select "Minute". Press the UP/DOWN buttons until the correct minute appears. Press the LEFT/RIGHT buttons to select "am/pm" and adjust with the UP/DOWN buttons. When you set the hours, make sure the correct time of day (am or pm) appears to the right of the time. English-32 O P E R AT I O N 3 Press the LEFT/RIGHT buttons to select "Channel" and adjust with the UP/DOWN buttons. Press the LEFT/RIGHT buttons to select "Volume" and adjust with the UP/DOWN buttons. Press the LEFT/RIGHT buttons to select Setup. Press the UP/DOWN buttons to set the "On". (Repeatedly pressing the UP/DOWN buttons will alternate between On and Off. ) When finished, press the ENTER button. To deactivate the "On time", select "Off" during this step. 4 To set the Off time, press the UP/DOWN buttons to select "Off Timer". Press the ENTER button and set the hours and minutes. (Follow the same procedure as in steps 2~3 above. ) 5 When finished setting the timer, press the EXIT button to exit. · Auto Power Off When you set the timer on, your television will be turned off if you do not operate any controls for 3 hours after the TV has been turned on with the `Timer On' function. English-33 OPERATION Setting the Sleep Timer Set the timer for the TV to turn off at the preset time automatically. Sleep timer 1 Press the MENU button to display the on-screen menu. Press the UP/DOWN buttons to select "Setup", then press the ENTER button. Press the ENTER button to select "Time". 2 Press the UP/DOWN buttons to select "Sleep Timer", then press the ENTER button. 3 Press the UP/DOWN buttons repeatedly until the correct time appears. Press the EXIT button to exit. · Easy Way to Set the Sleep Timer Press the button on the remote. The number on the screen changes from Off · 30 · 60 · 90 · 120 · 150 · 180 English-34 O P E R AT I O N Viewing Closed Captions Your TV decodes and displays the closed captions that are broadcast with certain TV shows. These captions are usually subtitles for the hearing impaired or foreign-language translations. All VCRs record the closed caption signal from television programs, so home-recorded video tapes also provide closed captions. Most pre-recorded commercial video tapes provide closed captions as well. Check for the closed caption symbol in your television schedule and on the tape's packaging : . 1 Press the MENU button to display the on-screen menu. Press the UP/DOWN buttons to select "Setup", then press the ENTER button. 2 Press the UP/DOWN buttons to select "Caption", then press the ENTER button. 3 Press the ENTER button to select "Caption". Note: You can also press the CAPTION button on the remote control to set up caption. In caption mode, captions appear at the bottom of the screen, 4 and they usually cover only a small Press the UP/DOWN portion ofto set caption buttons the picture. In text mode, information unrelated the ENTER button. to the program, such as news or Press the EXIT button to weather, is displayed. covers a large portion of the screen. "Off" or "On", then press 5 Depending on the particular broadcast, it might be necessary to make changes to "Channel" and "Field". [. . . ] <2> Align the mounting interface pad with the holes in the stand bottom and secure it with the four screws that come with the arm-type base, wall mount hanger or other bases. Wall Mount Instructions The following instructions apply to a hollow sheet-rock wall only. Tools/Hardware needed - Philips screwdriver, four toggle bolts, 5/8in dia. Contact Ergotron at (800) 888-8458 to purchase the triple pivot direct mount adapter and wall mount bracket kit. 47 97 47 97 007 101 007 101 099 003 099 003 (Pivot direct mount adapter) (Wall mount bracket kit) (Pivot direct mount adapter) (Wall mount bracket kit) Align the wall mount bracket on the wall at the desired height, making sure that the bracket will be mounted between the wall studs. [. . . ]