User manual SAMSUNG LN-T2353H

[. . . ] Displaying stationary graphics and images on screen, such as the dark side-bars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in the LCD picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. [. . . ] This process may take up to 20~30 minutes. It searches scrambled channels, which are to be removed from the list. You can add or delete a channel to display the channels you want. To use the Channel List function, first run Auto Program. You can set channels you watch frequently as favorites. Press the , , or button to select your favorite channels to watch among the labeled channels. To cancel your Favorite channel selection, press the ENTER button until the " " symbol is no longer highlighted. Only memorized channels can be set as favorite channels. To select the favorite channels you have set up, press the FAV. Displays your desired channel list automatically when you press CH LIST button on the remote. Press the or button to select "Default List Mode" (the channel list you want to appear when you press CH LIST), then press the ENTER button. Continue to adjust the antenna until you find the best position with the strongest signal. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer. When the control panel window appears, click on "Appearance and Themes" and a display dialog-box will appear. When the control panel window appears, click on "Display" and a display dialog-box will appear. The correct size setting (resolution) Optimum: 1920 X 1080 pixels If a vertical-frequency option exists on your display settings dialog box, the correct value is "60" or "60 Hz". If the signal from the system doesn't equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video. For the display modes listed below, the screen image has been optimized during manufacturing. This function does not work in DVI-Digital mode. Adjusting the Screen Quality The purpose of the picture quality adjustment is to remove or reduce picture noise. [. . . ] When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. Standard dimensions for wall mount kits are shown in the table above. When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided. [. . . ]