User manual SAMSUNG LN-T7081F

[. . . ] Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Com/global/register Record your Model and Serial number here for future reference. Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. [. . . ] To use the Channel List function, first run Auto Program. You can set channels you watch frequently as favorites. Press the , , or button to select your favorite channels to watch among the labeled channels. To cancel your Favorite channel selection, press the ENTER button until the " " symbol is no longer highlighted. Only memorized channels can be set as favorite channels. To select the favorite channels you have set up, press the FAV. Displays your desired channel list automatically when you press CH LIST button on the remote. Press the or button to select "Default List Mode" (the channel list you want to appear when you press CH LIST), then press the ENTER button. press the or button to select "All" , "Added" or "Favorite" then press the ENTER button. The Channel list you have chosen will now be set. You can display a list of all channels, added channels or your favorite channels. To toggle between your all channels, add channels or favorite channels, use the P. Channels can be labeled so that their call letters appear whenever the channel is selected. Press the or button to select the channel to be assigned a new name, then press the ENTER button. Press the or button to select a letter, a number or a blank (Results in this sequence: A. Press the button to switch to the next field, which will be selected. select a second letter or digit by pressing the or button , as above. Repeat the process to select the last three digits. When you have finished, press the ENTER button to assign the new name. To erase the assigned new name, select "Clear" by pressing the or button, then press the ENTER button. The names of digital broadcasting channels are automatically assigned and thus cannot be assigned by users. If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). [. . . ] However, there may be few bright or dark pixels on the screen. Place the TV face down on a soft cloth or cushion on a table. Put the stand into the hole at the bottom of the TV. Place the TV face down on a soft cloth or cushion on a table. [. . . ]