User manual SAMSUNG LN19A330J1D

[. . . ] 7 TOOLS Use to quickly select frequently used functions. 8 UP / DOWN / LEFT / RIGHT / ENTER Use to select on-screen menu items and change menu values. 9 INFO Press to display information on the TV screen. 0COLOR BUTTONS Use these buttons in the Channel list, etc. [. . . ] DTV Cable : -Cable : Cable % Viewing the Menus Stop Enter Return With the power on, press the MENU button. The menu's left side has icons: Picture, Sound, Channel, Setup, Input. Press the or button to select one of the icons. Then press the ENTER button to access the icon's sub-menu. The on-screen menus disappear from the screen after about one minute. Auto Program Plug & Play Removing scrambled channel. DTV Cable 0 % Stop Enter Return Storing Channels in Memory (Automatic Method) 3 Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER button. Press the or button to select "Auto Program", then press the ENTER button. Press the or button to select the antenna connection, then press the ENTER button. TV Auto Program Selects the antenna to execute the Auto Program function. To Stop the Auto Program Function Press the MENU button while the Auto Program function is being executed. You can also press the ENTER button to stop the setup. Checking to see if Channels were Stored in Memory Press the CH button. Only the channels stored in memory will be selected (in order). Air Cable Auto Start Start Start Enter Enter Return Return Move Move Selecting the antennas · Air: "Air" antenna signal. · Cable: "Cable" antenna signal. · Auto: "Air" and "Cable" antenna signals. When selecting the Cable TV system: Press the ENTER button to start the auto program. Press the or button, then press the or to select the correct analog signal cable system source among "STD", "HRC", and "IRC". If you have Digital cable TV, select the cable system signal source for both Analog and Digital. TV Analog Auto Program Selects a cable signal type for your location. STD HRC IRC STD HRC IRC Start Digital Move Move Enter Enter Return Return English- Setting the Channel List Using this menu, you can Add/Delete or set Favorite channels and use the program guide for digital broadcasts. To use the Channel List function, first run "Auto Program". Picture Mode · Dynamic: Selects the picture for high-definition in a bright room. · Standard: Selects the picture for the optimum display in a normal environment. · Movie: Selects the picture for viewing movies in a dark room. 3 Press the MENU button. Press the or button to select "Channel", then press the ENTER button. Press the or button to select "Channel List", then press the ENTER button. · Contrast: Adjusts the contrast level of the picture. · Brightness: Adjusts the brightness level of the picture. [. . . ] This appears when you press and hold the EXIT button for a while. The product settings are reset to the factory defaults. "Check signal cable" message. Black bars on the screen. Picture has a Red/Green or Pink tint. Ghosting on picture Horizontal bars appear to flicker, jitter or shimmer on the image. [. . . ]