User manual SAMSUNG LN22A450C1

[. . . ] Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Thank you for purchasing this Samsung product. To receive more complete service, please register your product at Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. [. . . ] Just Scan Use the function to see the full image without any cutoff when HDMI (720p/1080i), Component (1080i) signals are input. Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. Low: Reduces screen noise at a low level. If you set DNIe to on, you can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality. Demo: The screen before applying DNIe appears on the right screen after applying DNIe appears on the left. DNIeTM (Digital Natural Image engine) This feature brings you a more detailed image with 3D noise reduction and detailed, contrast and white enhancement. Setting the hDMI Black Level You can select the black level on the screen to adjust the screen depth. This function is active only when the external input connects to HDMI (RGB signals). "HDMI Black Level" function may not be compatible with or external devices. This function displays the blue signal only by removing the red and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Color and Tint of video equipment such as DVD players, Home Theaters, etc. Using this function, you can adjust the Color and Tint to preferred values appropriate to the signal level of each video device using the Red/Green/Blue/Cyan/Magenta/Yellow Color Bar Patterns, without using an additional Blue Filter. "Blue Only Mode" is available when the picture mode is set to "Movie" or "Standard". You can use the PIP feature to simultaneously watch two video sources. (See page 30 to select the PIP picture sound. ) This product has one built-in tuner, which does not allow PIP to function in the same mode. If you turn the TV off while watching in PIP mode and turn it on again, the PIP window will disappear. You can view Analog TV broadcasts on the PIP screen (sub-picture) when the main picture is from an external device connected to HDMI, Component1, 2 or PC. PIP Settings Main picture Component 1, 2 HDMI, PC Sub picture TV, AV The sub picture can serve different source selections based on what the main picture is set to. The channel can be active when the sub picture is set to TV. You can select the sound mode to best suit the programming you're watching. [. . . ] If you fasten the screws with the LCD TV placed down, it may lean to one side. Remove four screws from the back of the TV. Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. [. . . ]