User manual SAMSUNG LN23R51BX OPEN SOURCE GUIDE (VER.1.1)

[. . . ] Register your product at www. samsung. com/global/register BN68-00883B-00 Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. · Digital Ready TV: When you select the regular screen (4:3) mode to watch an SD-grade digital broadcast (and the set-top box output is 480p). Although digital broadcasting must be in the wide screen (16:9) HD format, broadcasters sometimes show programs made originally in the regular screen format (4:3) by converting the signals into digital form, in which case the left and right side edges of the screen are cropped. Note: If the borders at the left, right and the center of the screen remain fixed for an extended period of time, the amount of light transmission will also remain varied and as a result the borders may leave traces. · Digital Ready TV: When you select the wide screen (16:9) mode to watch an SD-grade digital broadcast (and the set-top box output is 1080i). Do not leave the screen in pause mode for extended periods of time as you may experience temporary or permanent image burn. · Digital Ready TV: When the TV receives HD-grade signals (and the set-top box output is 1080i). When you watch a digital HD-grade broadcast on a regular (4:3) TV with the screen size "16:9" or "Panorama" selected, you will be able to watch the program but the top and bottom edges of the screen will be cropped. Note: If the borders at the top, bottom and the center of the screen remain fixed for an extended period of time, the amount of light transmission will also remain varied and as a result the borders may leave traces. Do not leave the screen in pause mode for extended periods of time as you may experience temporary or permanent image burn. · Integrated Digital TV (Wide-screen): When the TV receives SD-grade (regular) broadcasting signals (receives 480p regular signals). · Digital Ready TV (wide-screen): digital TV: When the TV receives SD-grade (regular) broadcasting signals (with a set-top box). Although digital broadcasting must be in the wide screen (16:9) HD format, broadcasters sometimes show programs made originally in the regular screen format (4:3) by converting the signals into digital form, in which case the left and right side edges of the screen are cropped. Note: If the borders at the left, right and the center of the screen remain fixed for an extended period of time, the amount of light transmission will also remain varied and as a result the borders may leave traces. · When you watch an analog (regular) broadcast on a wide-screen TV (with the 4:3 screen mode selected). Do not leave the screen in pause mode for extended periods of time as you may experience temporary or permanent image burn. · When you watch a DVD, CD or a video in wide-screen (21:9) format on a wide-screen (16:9) TV. · When you connect a computer or a game console to the TV and select the 4:3 screen mode. If you connect a DVD player, computer or a game console to the wide-screen TV and watch a movie or play a game in regular (4:3) or wide (21:9) screen mode, the left and right side edges, or the top and bottom edges of the screen will be cropped. [. . . ] Press the UP/DOWN buttons to select "Picture", then press the ENTER button. 2 Press the ENTER button. 3 Press the UP/DOWN button to select "Color Tone", then press the ENTER button. 4 Press the UP/DOWN buttons to select "Cool2", "Cool1", "Normal", "Warm1", or "Warm2". Press the ENTER button. Choose from the following Color Tone settings: "Cool2", "Cool1", "Normal", "Warm1", "Warm2" according to personal preference. The adjusted values are stored according to the selected Picture mode. The "Reset" will be set for each picture mode. Press the EXIT button to exit. Resetting the Picture Settings to the Factory Defaults Press the ENTER button again to select "Mode ". Press the UP/DOWN buttons to select "Reset", then press the ENTER button. English-31 PICTURE CONTROL Changing the Screen Size 1 Press the MENU button to display the menu. Press the UP/DOWN buttons to select "Picture", then press the ENTER button. Only the wide and 4:3 sizes can be selected when the Source is PC. 2 Press the UP/DOWN buttons to select "Size" then press the ENTER button. 3 Press the UP/DOWN buttons to select "Wide", "Panorama", "Zoom" or "4:3". Press the EXIT button to exit. Supported screen resolution modes may differ depending on the model of the product. · · · Wide Zoom : Sets the picture to 16:9 wide mode. : Magnifies the size of the picture on the screen. [Positioning and Sizing the screen using Zoom] · Resizing the screen using the Zoom enables the positioning and sizing of the screen to up/down direction using the or button as well as the screen size. · Move the screen up/down using the or button after selecting the by pressing the or button. · Resize the screen vertically using the or button after selecting the by pressing the or button. Press the UP/DOWN buttons to select "Picture", then press the ENTER button. 2 Press the UP/DOWN buttons to select "Dynamic Contrast", then press the ENTER button. This function doesn't work when the Source is in PC mode or PIP is set to on. 3 Press the UP/DOWN buttons to select "Off". Press the EXIT button to exit. English-38 PICTURE C O N T R O L Brightness Sensor The Brightness Sensor adjusts the screen brightness automatically by using a light detecting sensor. 1 Press the MENU button to display the menu. Press the UP/DOWN buttons to select "Picture", then press the ENTER button. 2 Press the UP/DOWN buttons to select "Brightness Sensor", then press the ENTER button. This function doesn't work when the Source is in PC mode. 3 Press the LEFT/RIGHT buttons to select "On". Press the EXIT button to exit. Screen brightness is adjusted automatically depending on the brightness of the surrounding environment. English-39 PICTURE CONTROL Viewing Picture-in-Picture This product has one built-in tuner, which does not allow PIP to function in the same mode. For example, you cannot watch one TV channel in the main screen, and a different one in the PIP screen. Please see `PIP Settings' below for details. You can use the PIP feature to simultaneously watch two video sources. Activating Picture-in-Picture 1 Press the MENU button to display the menu. Press the UP/DOWN buttons to select "Picture", then press the ENTER button. Press the UP/DOWN buttons to select "PIP", then press the ENTER button. 2 Press the ENTER button. Press the UP/DOWN buttons to select "On". Press the ENTER button. If you turn the TV off while watching in PIP mode and turn it on again, the PIP window will disappear. Alternate method: Press the PIP button on the remote control repeatedly to activate or deactivate the PIP. English-40 PICTURE C O N T R O L Selecting a Signal Source (External A/V) for PIP 3 Press the UP/DOWN buttons to select "Source", then press the ENTER button. [. . . ] Note: If the bracket is not firmly fixed to the wall, LCD TV can fall off. 2 Turn the power off and unplug the power cord from the outlet. Place the TV faced down on a soft cloth or cushion on a table. Attach the set-bracket onto the rear side of the TV set and secure the screws . 3 Insert three Hangers of the set-bracket into the grooves of the wall-bracket Fix set-bracket and wall-bracket with screws . [. . . ]