User manual SAMSUNG LN32A450C1

[. . . ] Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Thank you for purchasing this Samsung product. To receive more complete service, please register your product at Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. [. . . ] Setting the hDMI black Level You can select the black level on the screen to adjust the screen depth. This function is active only when the external input connects to HDMI (RGB signals). "HDMI Black Level" function may not be compatible with or external devices. This function displays the blue signal only by removing the red and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Color and Tint of video equipment such as DVD players, Home Theaters, etc. Using this function, you can adjust the Color and Tint to preferred values appropriate to the signal level of each video device using the Red/Green/Blue/Cyan/Magenta/Yellow Color Bar Patterns, without using an additional Blue Filter. "Blue Only Mode" is available when the picture mode is set to "Movie" or "Standard". You can use the PIP feature to simultaneously watch two video sources. (See page 37 to select the PIP picture sound. ) This product has one built-in tuner, which does not allow PIP to function in the same mode. If you turn the TV off while watching in PIP mode and turn it on again, the PIP window will disappear. You can view Analog TV broadcasts on the PIP screen (sub-picture) when the main picture is from an external device connected to HDMI1, HDMI2, HDMI3, Component1, 2 or PC. PIP Settings Main picture Component 1, 2 HDMI1, HDMI2, HDMI3 PC TV, AV1, AV2 Sub picture The sub picture can serve different source selections based on what the main picture is set to. You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke. "Size" is only available if main picture is in HDMI mode. â· You can adjust picture position only by using the size menu. The channel can be active when the sub picture is set to TV. You can select the sound mode to best suit the programming you're watching. Press the or button to select "Standard", "Music", "Movie", "Speech", or "Custom" sound setting, then press the ENtER button. Speech: emphasizes voice over other sounds. Custom: recalls your customized sound settings. The sound settings can be adjusted to suit your personal preference. Bandwidth Adjustment (00hz, 300hz, khz, 3khz, 0khz): To adjust the level of different bandwidth frequencies. [. . . ] The auto wall mount will not work when Anynet+ is operating. 37 and 40 inch models are not compatible with the old electrically powered wall mount model (WMN5090A*). Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. [. . . ]