User manual SAMSUNG LN32B540P8D

[. . . ] Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Thank you for purchasing this Samsung product. To receive more complete service, please register your product at N See the warranty card for more information on warranty terms. Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. [. . . ] The correct size setting (resolution): Optimum: 1360 x 768 pixels If a vertical frequency option exists on your display settings dialog box, the correct value is 60 or 60 Hz. If the signal from the system doesn't equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video. For the display modes listed below, the screen image has been optimized during manufacturing. N When using an HDMI / DVI cable connection, you must use the HDMI IN 1(DVI) jack. The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then make the vertical frequency adjustments on your PC and fine tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of the screen. The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned on the center of screen. You can replace all image settings with the factory default values. You can select a sound mode to suit your personal preferences. The sound settings can be adjusted to suit your personal preference. Selects the sound mode among the predefined settings. Adjusts the balance between the right and left speaker. To adjust the level of different bandwidth frequencies. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. Digital-TV broadcasts are capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages). O You can listen in a language other than the Preferred Language by pressing the MTS button on the remote control. n Preferred Language is available only in Digital TV mode. N You can only select the language from among the actual languages being broadcast. Mono: Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal. [. . . ] N Our 57" and 63" models do not comply with VESA Specifications. Therefore, you should use our dedicated wall mount kit for this model. N Do not exceed 15 degrees tilt when mounting this TV. Do not install your Wall Mount Kit while your TV is turned on. [. . . ]