User manual SAMSUNG LN32R53B OPEN SOURCE GUIDE (VER.1.1)

[. . . ] Displaying stationary graphics and images on screen, such as the dark side-bars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in the LCD picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. [. . . ] Press the ENTER Press the or button to choose the language (English, Spanish or French) you want, then press the ENTER button. You can only select the language from among the actual languages being broadcast. You can listen in a language other than the Preferred language by pressing the MTS button on the remote control. Press the or button to select a setting you want, then press the ENTER button. Mono: Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal. SAP: Choose to listen to the Separate Audio Program, which is usually a foreign-language translation. "Multi-Track Sound" is available only in Analog TV mode. Depending on the particular program being broadcast, you can listen to "Mono", "Stereo" or "SAP". Sound output from the TV speakers is muted. When "TV Speaker" is set to "Off", Sound menus except "Multi-Track Options" cannot be adjusted. the VOL , VOL is set to "Off". The names of digital broadcasting channels are automatically assigned and cannot be labelled. Only analog TV channels can be fine tuned. If you do not store the fine-tuned channel in memory, adjustments are not saved. Unlike analog channels, which can vary in reception quality from "snowy" to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. so , unlike analog channels , you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels. If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer. [. . . ] Do not use fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. Do not exceed 15 degrees tilt when mounting this TV. [. . . ]