User manual SAMSUNG LN40A650A2R

[. . . ] Unplug the cable or antenna from the back of the TV. Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape. Each VCR has a different back panel configuration. If you have a "mono" (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the TV. [. . . ] HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video signals using a single cable. The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed. Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration. Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration. when connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) , match the color of the connection terminal to the cable. When using an HDMI/DVI cable connection, you must use the HDMI IN 1 jack. Each DVD Player or Cable Box/ Satellite receiver (Set-Top Box) has a different back panel configuration. Each Camcorder has a different back panel configuration. Unplug the cable or antenna from the back of the TV. Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape. Each VCR has a different back panel configuration. You can also use the POWER button on the TV. After all the available channels are stored, it start to remove scrambled channels. With the power on, press the MENU button. The on-screen menus disappear from the screen after about one minute. Press the MENU button while the Auto Program function is being executed. Only the channels stored in memory will be selected (in order). Press the or button, then press the or to select the correct analog signal cable system source among "STD", "HRC", and "IRC". If you have Digital cable TV, select the cable system signal source for both Analog and Digital. Using this menu, you can Add/Delete or set Favorite channels and use the program guide for digital broadcasts. To use the Channel List function, first run "Auto Program". Dynamic: Selects the picture for high-definition in a bright room. [. . . ] Set your cable/satellite box to stretch or widescreen mode to eliminate the bars. Make sure the Component cables are connected to the correct jacks. If you are using a Cable/Satellite box, you must set Closed Captioning on the box, not your TV. Your cable box may need a firmware upgrade. [. . . ]