User manual SAMSUNG LN40D630M3F QUICK GUIDE

[. . . ] Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to one side. (HDD) USB1 AUDIO OUT DVD / Blu-Ray player / Cable Box / Satellite receiver (STB) Connecting a PC Connect your TV to a PC to use it as a Monitor. AV IN 2 HDMI IN 4 (HDD) USB1 USB1 Very Good Connection HD connection Using an HDMI Cable AUDIO OUT 1 Guide Stand HDMI IN 4 Rear ATTENTION USB2 DO NOT USE DO NOT USE DO NOT USE CHEMICALS GREASE OIL Stand Front 3 (HDD) USB1 To install batteries into your remote control, follow these steps: 1. Lift the cover on the back of the remote upward as shown in the figure to the right. Install two AAA batteries. HDMI IN 4 Make sure to match the + and - ends of the batteries to the diagram in the battery compartment. 3. [. . . ] IMPORTANT: If your TV is attached to a cable or satellite box, skip Steps 3 through 5. After Plug & Play is complete, set your TV to Channel 3 or 4, according to the directions for your cable or satellite box. 2. Basic Functions Changing the Screen Size Your TV has several screen size options, each designed to work best with specific types of video input. If you have a cable box or satellite receiver, it may have its own set of screen sizes as well. To change the screen size, press the P. SIZE button on your remote. The first time you press it, your TV displays the current setting. Thereafter, each time you press the P. SIZE button, you change the size of the picture on the screen. 3. To change the Picture Mode, follow these steps: 1. With the TV on, press the TOOLS button on your remote. Using the or on your remote, select Picture mode. On the Picture Mode menu, use the or on your remote to select the Picture Mode you want. Press the EXIT button to exit the menu. 4. If your TV is attached to a cable system and you have no cable box, you must select your cable system type. If you have Digital cable, you must select the cable system type for both Analog and Digital. English - 1 Remote Control Buttons and Functions: This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel, Volume buttons. Turns the TV on and off. Press to switch between the sources (Blu-ray player, cable box, DVD player, etc. ) connected to your TV. Press number buttons for direct access to channels. Turns the remote control light on and off. When on, the buttons become illuminated for a moment when pressed. (Using the remote control with this button set to off will reduce the battery usage time. ) Connecting a USB Device for Media Play You can enjoy photo, music, and movie files stored on a USB device by connecting it to the TV and using the Media Play feature. To connect a USB device for Media Play, follow these steps: 1. Connect a USB device containing photo, music and/ or movie files to the USB1 (HDD) or USB2 jack on the side of the TV. When the Application selection screen appears, press the ENTERE button on your remote to select Media Play (USB). MediaPlay Videos Network Connection - Wireless You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly, you must first attach a Samsung Wireless LAN Adapter (WIS09ABGN, WIS09ABGN2, WIS10ABGN - sold separately) to either the USB1 (HDD) or USB2 port on the back of your TV. See the illustration below. USB Drive The LAN Port on the Wall Wireless IP sharer (AP having DHCP Server) TV Side Panel Samsung Wireless LAN Adapter TV Side Panel or LAN Cable Samsung Wireless LAN Adapter Press to select additional digital channels broadcast by the same station. For example, to select channel 54-3, press 54, press -, and then press 3. [. . . ] Select Network Test to check internet connectivity. 4. 6. Select Clock Set, and then press the ENTERE button. Using the number buttons on your remote, enter the Month, Day, Year, Hour, and Minute. Use the or button to move between entry fields. [. . . ]