User manual SAMSUNG LN46N71B

[. . . ] * W. LINK (WISELINK) This function enables you to view and play photo and music files from an external device. ( MENU Displays the main on-screen menu. a P/DOWN/LEFT/ U RIGHT/ENTER Press the Up/Down/Left/Right sections of the wheel button and Enter to select on-screen menu items and change menu values. You can navigate up and down the menu, switch channels and adjust the volume by turning the wheel button. [. . . ] If your VCR is stereo, you must connect two cables. Audio Cable (Not supplied) Video Cable (Not supplied) 5 Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape. Each VCR has a different back panel configuration. When connecting a VCR, match the color of the connection terminal to the cable. When connecting to AV NI 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow). S-Video Connection TV Side Panel TV Rear Panel VCR Rear Panel 2 3 2 3 RF Cable (Not supplied) S-Video Cable (Not supplied) Audio Cable (Not supplied) To begin, follow steps 1­3 in the previous section to connect the antenna or cable to your VCR and your TV. Connect an S-Video Cable between the S-VIDEO OUT jack on the VCR and the AV IN 2 [S-VIDEO] jack on the TV. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 2 [R-AUDIO-L] jacks on the TV. An S-Video cable may be included with a VCR. (If not, check your local electronics store. ) Each VCR has a different back panel configuration. When connecting a VCR, match the color of the connection terminal to the cable. English-5 Connecting a Digital Audio System TV Rear Panel Digital Audio System Connect an Optical Cable between the "DIGITAL AUDIO OUT (OPTICAL)" jacks on the TV and the Digital Audio Input jacks on the Digital Audio System. When a Digital Audio System is connected to the "DIGITAL AUDIO OUT (OPTICAL)" jack: Decrease the volume of the TV and adjust the volume level with the system's volume control. Optical Cable (Not supplied) 5. 1CH audio is possible when the TV is connected to an external device supporting 5. 1CH. Each Digital Audio System has a different back panel configuration. When the receiver (home theater) is set to On, you can hear sound output from the TV's Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5. 1 channel sound to the Home theater receiver. Air Cable Auto Move Enter To Stop the Auto Program Function Press the MENU button while the Auto Program function is being executed. You can also press the ENTER button to stop the setup. Start Start Start Return Checking to see if Channels were Stored in Memory Press the CH button. Only the channels stored in memory will be selected (in order). Selecting the antennas · Air: "Air" antenna signal. · Cable: "Cable" antenna signal. · Auto: "Air" and "Cable" antenna signals. English-8 Setting the Channel List You can delete or add a channel to display the channels you want. Picture Mode · Dynamic: Selects the picture for high-definition in a bright room. Press the ENTER button. Picture Backlight Contrast Brightness Sharpness Color Tint (G/R) Detailed Settings Picture Option :7 : 95 : 45 : 50 : 50 : G50/R50 Picture Mode Backlight Contrast Brightness Sharpness Color Tint (G/R) Detailed Settings :Standard Dynamic : 7Standard Movie : 95 : 45 : 50 : 50 : G50/R50 Backlight Move Adjust Enter 7 Return Picture Adjustment · Backlight: Adjusts the brightness of LCD back light. · Contrast: Adjusts the contrast level of the picture. · Brightness: Adjusts the brightness level of the picture. · Sharpness: Adjusts the edge definition of the picture. · Color: Adjusts color saturation of the picture. [. . . ] Make sure the broadcast you're receiving is High Definition (HD). HD channels sometimes broadcast Standard Definition (SD) programming, which can cause black bars. Set your cable/satellite box to stretch or widescreen mode to eliminate the bars. Make sure the Component cables are connected to the correct jacks. [. . . ]