User manual SAMSUNG LN55B650T1M

[. . . ] 4 See "Remote Control" in the owner's instructions for details. & PRE-CH Tunes to the previous channel. ( SOURCE Press to display and select the available video sources. ) W. LINK (WISELINK) This function enables you to view and play photo and music files from an external device. a MENU Displays the main on-screen menu. [. . . ] When connecting to AV NI 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow). If you have a "mono" (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of the TV. Alternatively, connect the cable to the "R" jack. If your VCR is stereo, you must connect two cables. S-Video Connection 1 TV Rear Panel VCR Rear Panel To begin, follow steps 1­3 in the previous section to connect the antenna or cable to your VCR and your TV. Connect an S-Video Cable between the S-VIDEO OUT jack on the VCR and the [S-VIDEO] jack on the TV. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 1 [R-AUDIO-L] jacks on the TV. 1 Audio Cable (Not supplied) S-Video Cable (Not supplied) RF Cable (Not supplied) An S-Video cable may be included with a VCR. (If not, check your local electronics store. ) Each VCR has a different back panel configuration. When connecting a VCR, match the color of the connection terminal to the cable. English- Connecting a Digital Audio System TV Rear Panel 1 Digital Audio System Connect an Optical Cable between the "DIGITAL AUDIO OUT (OPTICAL)" jacks on the TV and the Digital Audio Input jacks on the Digital Audio System. When a Digital Audio System is connected to the "DIGITAL AUDIO OUT (OPTICAL)" jack: Decrease the volume of the TV and adjust the volume level with the system's volume control. 1 Optical Cable (Not supplied) 5. 1CH audio is possible when the TV is connected to an external device supporting 5. 1CH. Each Digital Audio System has a different back panel configuration. When the receiver (home theater) is set to On, you can hear sound output from the TV's Optical jack. Press the or button to select "Channel", then press the ENTER button. Press the or button to select "Auto Program", then press the ENTER button. Press the or button to select the antenna connection, then press the ENTER button. Auto Program Select the Antenna source to memorize. Air Cable Auto Move Enter To Stop the Auto Program Function Press the MENU button while the Auto Program function is being executed. Press the ENTER button, to select "Picture". Press the ENTER button to select "Mode". Press the or button to select "Dynamic", "Standard" or "Movie". Press the ENTER button. Picture Backlight Contrast Brightness Sharpness Color Tint (G/R) Detailed Settings Picture Options : : 95 : 45 : 50 : 50 : G50/R50 Picture Mode Backlight Contrast Brightness Sharpness Color Tint (G/R) Detailed Settings :Dynamic : 95 Movie : 45 : 50 : 50 : G50/R50 Dynamic : 7 Standard Backlight Move Adjust Enter 7 Return Picture Adjustment · Backlight: Adjusts the brightness of LCD back light. · Contrast: Adjusts the contrast level of the picture. · Brightness: Adjusts the brightness level of the picture. · Sharpness: Adjusts the edge definition of the picture. [. . . ] Make sure the broadcast you're receiving is High Definition (HD). HD channels sometimes broadcast Standard Definition (SD) programming, which can cause black bars. Set your cable/satellite box to stretch or widescreen mode to eliminate the bars. Make sure the Component cables are connected to the correct jacks. [. . . ]