User manual SAMSUNG LN55C750R2F QUICK GUIDE

[. . . ] Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to one side. 1 2 DVD / Blu-Ray player / Cable Box / Satellite receiver (STB) Connecting a PC Connect your TV to a PC to use it as a Monitor. Very Good Connection HD connection using an HDMi Cable AUDIO OUT AV IN 2 (HDD) (HDD) USB1 Component connection (up to 1080p) Using a Component Cable AUDIO OUT COMPONENT OUT DVI OUT Guide Stand Device PC Audio/Video connection (480i only) Stand Bottom View VCR / DVD / Blu-ray player / Cable Box / Satellite receiver Using an Audio/Video Cable VIDEO OUT AUDIO OUT Good Connection Using an D-Sub Cable PC OUT AUDIO OUT VCR When connecting to AV in 1 on the back of your TV, Screw Top View VCR / DVD / Blu-ray player / Cable Box / Satellite receiver 3 attach the video cable (yellow) to the green jack next to the AV in 1 label. The jack will not match the color of the video cable (yellow). PC Lowest Quality Connection Front Rear Step 5 : Run Plug & Play After you have selected the cable system type, select Start, and then press the EntErE button on your remote. the following sizes are available: When you turn on your TV for the first time, it automatically launches the Plug & Play function. With Plug & Play, you can select the On Screen Display language, set the clock mode, and launch the TV's channel memorizing process. [. . . ] The first time you press it, your TV displays the current setting. Thereafter, each time you press the P. SizE button, you change the size of the picture on the screen. Power Input or Use a 75 ohm (round) cable. 3. to change the Picture Mode, follow these steps: 1. With the TV on, press the tooLS button on your remote. Using the or on your remote, select Picture mode. On the Picture Mode menu, use the or on your remote to select the Picture Mode you want. Press the Exit button to exit the menu. Make sure the AC power cord is plugged in securely to the wall outlet and the TV. 4. If your TV is attached to a cable system and you have no cable box, you must select your cable system type. If you have Digital cable, you must select the cable system type for both Analog and Digital. V IN 2 USB2 HDMI IN 4 (HDD) USB1 English - 1 Remote Control Buttons and Functions: This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel, Volume buttons. Turns the TV on and off. Press to switch between the sources (Blu-ray player, cable box, DVD player, etc. ) connected to your TV. Press number buttons for direct access to channels. Turns the remote control light on and off. When on, the buttons become illuminated for a moment when pressed. (Using the remote control with this button set to off will reduce the battery usage time. ) Connecting a USB Device for Media Play You can enjoy photo, music, and movie files stored on a uSB device by connecting it to the tV and using the Media Play feature. to connect a uSB device for Media Play, follow these steps: 1. Connect a USB device containing photo, music and/or movie files to the uSB1 (HDD) or uSB2 jack on the side of the TV. When the Application selection screen appears, press the EntErE button on your remote to select Media Play (uSB). MediaPlay Videos Network Connection - Wireless You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly, you must first attach a Samsung Wireless LAN Adapter (WIS09ABGN, WIS09ABGN2, WIS10ABGN - sold separately) to either the uSB1 (HDD) or uSB2 port on the back of your TV. See the illustration below. uSB Drive The LAN Port on the Wall Wireless IP sharer (AP having DHCP Server) Samsung Wireless LAN Adapter TV Side Panel TV Side Panel or LAN Cable Samsung Wireless LAN Adapter Press to select additional digital channels broadcast by the same station. For example, to select channel 54-3, press 54, press -, and then press 3. Displays the channel list on the screen. Displays the Content View, which includes Channel List, Internet@TV, Media Play, AllShare and 3D. Quickly selects frequently used functions. [. . . ] Use the or button to move between entry fields. Press the rEturn button on your remote when done. Some networks are Static IP networks. If your network is a Static IP network, you can not use DHCP to configure the network connection. Instead, you must enter the iP Address, Subnet Mask, Gateway, and DnS Server manually. [. . . ]