User manual SAMSUNG LS32A23WX/XSA

[. . . ] DDC - SCL (Clock) Composite H/V Red (R) Green (G) Blue (B) Grounding Grounding (DDC return) Grounding - Red (R) Grounding - Green (G) Grounding - Blue (B) No connection Grounding - Sync. / Self test Grounding DDC - SDA (Data) Horizontal/Vertical Sync. Not used DDC - SCL (Clock) English-2 01-BN68-00633F-02Eng. qxd 5/14/04 9:02 AM Page 7 Viewing the Connection Panel Connecting External A/V Devices - Connect RCA or S-VIDEO cables to an appropriate external A/V device such as a VCR, DVD or Camcorder. [. . . ] Not used DDC - SCL (Clock) English-2 01-BN68-00633F-02Eng. qxd 5/14/04 9:02 AM Page 7 Viewing the Connection Panel Connecting External A/V Devices - Connect RCA or S-VIDEO cables to an appropriate external A/V device such as a VCR, DVD or Camcorder. - Connect RCA audio cables to "(MONO)L-AUDIO-R" on the rear of your set and the other ends to corresponding audio out connectors on the A/V device. Connecting Headphones - Plug a set of headphones into the 3. 5mm mini-jack socket on the right-side of the set. - Headphones may be connected to the headphone output on the right-side of the set. While the headphones are connected, the sound from the built-in speakers will be disabled. Kensington Slot - This television has been designed to apply a burglarproof lock. (See next page. ) Retractable Stand Note: The maximum tilt angle is 13 degrees in the backward direction. Please do not tilt the TV outside the specified range. Using excessive force to tilt the TV may cause permanent damage to the mechanical part of the stand. Picture(3) shows the adjustment angle(0°~ 10°)when you use wall-mounted LCD TV after fixing it to wall. Note : Picture (2) shows the angle adjustment section while LCD TV is being converted from stand-based one to wall-mounted one or vice versa. - Click" sound indicates section change from 1 to 2 or 3 to 2(1->2, 3->2). English-6 04-BN68-00633F-02Eng. qxd 5/14/04 12:58 PM Page 54 Installing the Wall Mount Kit Note : This installation is to be used when attaching the wall mount to a concrete wall. When attaching to other building materials, please contact your nearest dealer. Components Please use provided components or parts to install the Wall Mount Kit. Bracket Anchors : 4EA Screws : 4EA Installation Guide How to assemble the Wall Mount Kit 1 Mark the location of hole on the wall using installation guide. Make over 35mm- depth- hole on the marked location using 5. 0-diameter drill. Connect bracket to the wall with screws after fitting anchors into the bracket holes. Note : If the bracket is not firmly fixed to the wall, LCD TV can fall off. 2 You may use LCD TV right after fixing it to the wall since stand is wrapped already turned over as shown in the picture 3 When using LCD TV in stand-based form, place the product on a cushion or other soft materials. Then turn over stand following the arrow direction below only after pressing button on the connected part where LCD TV is attached to stand. (Turn over stand in the opposite direction after pressing button when using LCD TV in wall-mounted form as well. ) English-7 04-BN68-00633F-02Eng. qxd 5/14/04 12:58 PM Page 55 Installing the Wall Mount Kit 4 Adjust LCD TV to the hook on the bracket and move in the direction of the arrow(Left) so that LCD TV can be completely fixed to the bracket. When bracket is assembled on the wall How to hang monitor up on a hook When installation is completed 5 6 Remove Installation Guide after completing setup of LCD TV on the wall. Push the LCD TV up and shift to the right to detach it from bracket. [. . . ] Then turn over stand following the arrow direction below only after pressing button on the connected part where LCD TV is attached to stand. (Turn over stand in the opposite direction after pressing button when using LCD TV in wall-mounted form as well. ) English-7 04-BN68-00633F-02Eng. qxd 5/14/04 12:58 PM Page 55 Installing the Wall Mount Kit 4 Adjust LCD TV to the hook on the bracket and move in the direction of the arrow(Left) so that LCD TV can be completely fixed to the bracket. When bracket is assembled on the wall How to hang monitor up on a hook When installation is completed 5 6 Remove Installation Guide after completing setup of LCD TV on the wall. Push the LCD TV up and shift to the right to detach it from bracket. [. . . ]