User manual SAMSUNG LTM295W

[. . . ] LTM295W LTM405W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCD TELEVISION SERVICE DIVISION 400 Valley Road, Suite 201 Mount Arlington, NJ 07856 TEL: 1-800-SAMSUNG (1-800-726-7864) www. samsungusa. com . . . . . . . . . . . . . Owner's Instructions BN68-00275D-00 Warning!Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. [. . . ] Press the CH w button to select "Channel", then press the VOL + button. 2 Press the CH w button to select "LNA. " 3 Press the VOL + button to set LNA "On. " Press the MENU button to exit the menu. Pressing VOL - or VOL + will alternate between "On" and "Off. " w ENG 4. 5 S P E C I A L F E AT U R E S DNIe (Digital Natural Image engine) Samsung' s New Technology bring you more detailed image with contrast enhancement and white enhancement. New image compensation algorithm gives brighter, clearer to our customers. DNIeTM Technology will fit every signals into your eyes. 1 Press the MENU button to display the menu. Press the CH w button to select "Function", then press the VOL + button. 2 Press the CH w button to select "DNIe", then press the VOL + and VOL ­ buttons to select "Off", "Medium", "High", or "Demo". Press the MENU button to exit the menu. · · · · Off: DNIe off Medium: Medium DNIe-enhanced image High: High DNIe-enhanced image Demo: The screen before applying DNIe appears on the right and the screen after applying DNIe appears on the left. ENG 4. 6 S P E C I A L F E AT U R E S Selecting the Color Tone 1 Press the MENU button to display the menu. Press the VOL + button to display the Picture menu. 2 Press the CH w button to select "Color tone. " 3 Press the VOL + or VOL buttons to select "Cool 2", "Cool 1", "Warm 1", "Standard" or "Warm 2" according to personal preference. Press the MENU button to exit the menu. ENG 4. 7 S P E C I A L F E AT U R E S Changing the Screen Size 1 Press the P. SIZE button to change the screen size. · · · · · · Wide: Sets the picture to 16:9 wide mode. Panorama: Use this mode for the wide aspect ratio of a panoramic picture. Zoom 1: Expands the picture with a 4:3 aspect ratio. Use the Channel Up/Down buttons to move the screen. Zoom 2: Expands the Zoom 1 format picture. Use the Channel Up/Down buttons to move the screen. Normal 1: Set the picture to 4:3(16:9 for DTV) normal mode. Normal 2: Original screen size. Note: The screen format depends on the input signal. · When TV, VIDEO, S-VIDEO, DVD (480i) signal is input, the following screen formats are available: Wide Panorama Zoom 1 Zoom 2 Normal 1 Normal 2. · When DTV signal is input: Wide Normal 1 Normal 2. · When PC signal is input: Full Normal Standard. · When DVD (480p) signal is input: Wide Zoom 1 Zoom 2 Normal 1 Normal 2. Freezing the Picture 1 Press the STILL button to freeze the main picture. · Not available if V-Chip is turned on. · Normal sound will still be heard. Press again to cancel. ENG 4. 8 S P E C I A L F E AT U R E S Special Sound Options Setting a Multichannel Television Stereo (MTS) Soundtrack When MTS is set to "Auto", MTS will be set automatically to "Mono" or "Stereo", according to the signal transmitted from the broadcasting company. If a channel is selected in an area where reception is poor, the sound might be distorted. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation . If this equipment does cause harmful interference to radio or television receptions, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. [. . . ]